![]()
|
|
||||||||
J. Biol. Chem., Vol. 279, Issue 27, 28345-28357, July 2, 2004
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



From the Virology Group, International Centre for Genetic Engineering and Biotechnology, New Delhi 110067, India
Received for publication, January 15, 2004 , and in revised form, April 13, 2004.
| ABSTRACT |
|---|
|
|
|---|
| INTRODUCTION |
|---|
|
|
|---|
The genome of HEV is a
7.2-kb polyadenylated, positive sense RNA that contains three open reading frames (ORFs), designated ORF1, ORF2, and ORF3 (13). Open reading frame 1 encodes the viral nonstructural protein of 1693 amino acids (
185 kDa) that contains domains shown to be associated with methyltransferases, papain-like cysteine proteases, RNA helicases, and RNA-dependent RNA polymerases (14). While it is not clear whether the HEV polyprotein is processed into functional units, biochemical activities associated with the methyltransferase and RNA-dependent RNA polymerase domains have been demonstrated (15, 16). The ORF2 codes for the HEV capsid protein and has been expressed using various in vitro systems. In animal cells, it expresses an
7488-kDa protein that carries N-linked glycosylation and localizes intracellularly as well as on the cell surface (10, 12). In Tn5 insect cells, the ORF2 expresses a protein of
52 kDa that assembles into virus-like particles (17). The ORF2 protein is also being explored as a potential vaccine against hepatitis E (18, 19).
Open reading frame 3 encodes a protein of
13.5 kDa (called pORF3) with unassigned function. We have shown earlier that pORF3 is phosphorylated by MAPK at a single serine residue (Ser-80) and that it associates with the cytoskeletal and membrane fractions in expressing cells (11). Recently we demonstrated the interaction between a C-terminal proline-rich domain in pORF3 and Src homology 3 (SH3) domains in some cellular proteins involved in signal transduction (20). These include members of the Src family of protein-tyrosine kinases (Src, Hck, and Fyn), the p85
regulatory subunit of phosphatidylinositol 3-kinase (PI3K), phospholipase C
, and the adaptor protein Grb2 (20). Furthermore transient or stable expression of ORF3 in cell lines led to increased activity and nuclear translocation of extracellular signal-regulated kinase (ERK) (20). However, the mechanism(s) of ERK activation by pORF3 has not been elucidated.
The MAPK cascade is a major signaling pathway involved in the regulation of cell proliferation, differentiation, stress responses, and apoptosis (2123). In mammalian cells, this pathway has three distinct components: the ERK pathway, the stress-activated protein kinase or c-Jun N-terminal kinase (SAPK/JNK) pathway, and the p38 kinase pathway (23). While the ERK pathway is involved in cell proliferation and differentiation (21), the SAPK/JNK and p38 pathways are involved in the cellular response to cytokines or environmental stress (22). These conserved cascades consist of a three-kinase module that includes a MAPK, which is activated by a MAPK/ERK kinase (MEK), which in turn is activated by a MEK kinase (23). Following phosphorylation and activation in response to mitogenic or stress signals, the MAPK is translocated to the nucleus (23) where it phosphorylates transcription factors leading to modulation of gene expression.
A family of dual specificity MAPK phosphatases (MKPs) negatively regulates the MAPKs through dephosphorylation of threonine and tyrosine residues within the TXY activation motif (24). At least 10 different MKPs have been identified in mammalian systems, implying a complex regulatory role of these enzymes in the MAPK signaling pathway (24, 25). Based on their substrate specificity, MAPK-docking sites, subcellular localization, tissue-specific expression, and regulation by various stimuli, the MKPs are classified into three families (2426). These include the MKP-1/CL100-like phosphatases that are found in the nucleus and show increased specificity toward JNK/SAPK and p38 MAPKs (27), the MKP-3/Pyst1-like cytoplasmic phosphatases that are highly specific for ERK (28, 29), and a new group containing MKP-5 and MKP-7 that are cytoplasmic and highly specific for JNK/SAPK and p38 MAPKs (30). These phosphatases must be precisely regulated to avoid unexpected inactivation of MAPKs. Cross-talk between upstream regulators of the MAPK pathways and the MKPs is highly regulated both spatially and temporally in different cells in response to various stimuli.
The molecular mechanisms involved in pORF3-mediated ERK activation have not been characterized. In an attempt to show interactions between pORF3 and Pyst-1, a prototypic member of the MKP-3 class of cytoplasmic MAPK phosphatases, we used in vitro as well as in vivo assays. Immunoprecipitation and pull-down assays showing the interaction of these two proteins were further confirmed by yeast two-hybrid analysis and by fluorescence resonance energy transfer (FRET) imaging microscopy using variant enhanced green fluorescent protein (EGFP) fusions. Our results demonstrate that pORF3 interacts with MKP-3 and that this interaction is responsible for pORF3-mediated ERK activation. This is a novel mechanism through which a viral protein regulates the cellular ERK pathway.
| EXPERIMENTAL PROCEDURES |
|---|
|
|
|---|
300-bp) fragment was removed, and the vector backbone together with partial pyst1 sequence was end-filled and religated. To clone the C300 mutant (amino acids 283383) containing the catalytic site of Pyst1, plasmid C450 was digested with XmaI and XhoI, and the 300-bp fragment so released was cloned into the same sites in plasmid pGEX4T-3 (Amersham Biosciences). The recombinant GST fusion proteins were expressed in Escherichia coli DH5
according to standard procedures (31). The expression vectors for ORF3 and Pyst1 fused to enhanced cyan fluorescent protein (ECFP) or enhanced yellow fluorescent protein (EYFP) were constructed as follows. The pyst1 gene was isolated from plasmid pSG-HA-Pyst1 as a 1280-bp NheI and XhoI fragment and cloned into the same sites within the polylinker region of either the pECFP-C1 or pEYFP-N1 expression vectors (Clontech). The ORF3 fusions were made by first cloning an EcoRI-AccI fragment from plasmid pSG-ORF3 (10) into the EcoRI and BamHI sites of plasmid pEGFP-N3 (Clontech) by using an AccI-BamHI adaptor at the 3'-end of ORF3. Subsequently a HindIII-BamHI fragment from plasmid pEGFP-N3-ORF3 was end-filled and cloned into the EcoRI site of plasmid pECFP-N1 or pEYFP-N1. The ORF3 and vector control stable cell lines (20) as well as polyclonal antibodies to pORF3 (10) have been described earlier. The ERK1, phospho-ERK, JNK, phospho-JNK, p38, phospho-p38, and anti-HA tag antibodies were from Santa Cruz Biotechnology (Santa Cruz, CA). The Alexa dye-conjugated secondary antibodies were from Molecular Probes (Eugene, OR). Transfection, Inhibitors, and LysatesTransient transfections were carried out in COS-1 cells using the Lipofectin reagent (Invitrogen) and the indicated expression vectors. Vector control (pcNeo) and ORF3-expressing (ORF3/4) stable cell lines were seeded at about 50% confluency in 60-mm plates. Prior to inhibitor treatment, the cells were serum-starved for 6 h. One set of cells was then induced with 10% serum for 1 h, while another set was left without serum. For each inhibitor, one plate of pcNeo cells was incubated with the IC50 inhibitory concentration; the ORF3/4 cells were incubated with IC50,2 x IC50, and 5 x IC50 of the same inhibitor. The IC50 concentrations were as follows: UO126, 100 nM; calphostin C, 50 nM; LY294002, 1.4 µM; TMB-8, 500 nM; Genistein, 150 µM. After a 30-min incubation under serum-free conditions, the medium was adjusted to have a final serum concentration of 10%, and the cells were incubated for an additional 30 min prior to preparation of lysates. All inhibitors were obtained from Sigma.
Immunoprecipitation and Western BlottingUnless specified otherwise, metabolic labeling of cells and immunoprecipitation were as described earlier (10, 11). For Western blotting, proteins separated by SDS-PAGE were transferred to a nitrocellulose membrane (Hybond ECL, Amersham Biosciences). After blocking with Tris-buffered saline (TBS) containing 5% nonfat milk (Nestlé India Ltd.) for 12 h at room temperature, the membrane was washed with TBST (TBS containing 0.1% Tween 20) and incubated overnight at 4 °C with the primary antibody appropriately diluted in TBST containing 5% BSA. The blot was then washed three times for 10 min each with TBST and then incubated with horseradish peroxidase-linked anti-rabbit or anti-mouse IgGs diluted in TBST containing 5% nonfat milk. Chemiluminescent detection of proteins was carried out using the Phototope horseradish peroxidase Western blot detection system (Cell Signaling Technology, Beverly, MA) according to the supplier's protocol.
In Vitro Translation and GST Pull-downCoupled in vitro transcription and translation was carried out with the TNT system (Promega Corp., Madison, WI) according to the manufacturer's guidelines in the presence of [35S]methionine-cysteine (PerkinElmer Life Sciences) to label the synthesized protein(s). For the GST pull-down assay, glutathione-Sepharose beads (Amersham Biosciences) containing about 2 µg of the bait protein were washed once with GST binding buffer (20 mM Tris-HCl, pH 7.9, 500 mM NaCl, 5 mM MgCl2, 0.2 mM EDTA, 1 mM dithiothreitol, 0.1% Nonidet P-40, and a protease inhibitor mixture containing 16 µg/ml benzamidine hydrochloride, 10 µg/ml aprotinin, 10 µg/ml leupeptin, 10 µg/ml pepstatin A, 10 µg/ml o-phenanthroline, and 1 mM phenylmethylsulfonyl fluoride). The washed beads were resuspended in 500 µl of GST binding buffer containing 1 mg/ml BSA and 25 µl of the 35S-labeled in vitro translation mixture and incubated at 4 °C for 60 min with shaking. Subsequently the beads were washed six times using 1 ml of the GST wash buffer (20 mM Tris-HCl, pH 7.9, 1 M NaCl, 5 mM MgCl2, 0.2 mM EDTA, 1 mM dithiothreitol, 0.5% Nonidet P-40, and the protease inhibitor mixture) each time and then boiled in 20 µlof2x SDS-PAGE sample buffer. Following SDS-PAGE, the gel was subjected to fluorography.
ERK AssaysFor the ERK assay using myelin basic protein (MBP) as a substrate, cells were lysed in 500 µl of radioimmunoprecipitation buffer containing 20 mM NaF and 1 mM Na3VO4 and the protease inhibitor mixture on ice for 1015 min. The lysates were clarified in a microcentrifuge at 13,000 rpm at 4 °C for 15 min followed by sequential incubation with 5 µl of polyclonal anti-ERK1 antibodies for 2 h and 10 µl of protein A-Sepharose (Amersham Biosciences) overnight at 4 °C with rocking. The beads were washed three times with radioimmunoprecipitation buffer and once with kinase buffer (20 mM Tris, pH 7.5, 10 mM MgCl2). Finally each sample was resuspended in 30 µl of kinase buffer containing 20 µM ATP, 0.5 µg of MBP, and 10 µCi of [
-32P]ATP and incubated at 30 °C for 30 min. The reaction was terminated by the addition of 10 µlof6x SDS loading buffer and boiling for 5 min, and the samples were resolved by SDS-15% PAGE. The ERK activity was also assayed using Elk-1 as a substrate with a p44/42 kinase assay kit (Cell Signaling Technology) according to the manufacturer's instructions. The cells were lysed in 500 µl of ice-cold cell lysis buffer containing 1 mM phenylmethylsulfonyl fluoride. After sonication four times for 5 s each, the cell lysate was clarified in a microcentrifuge at 10,000 rpm at 4 °C for 10 min. The lysates were immunoprecipitated overnight at 4 °C with beads carrying immobilized monoclonal anti-phospho-p44/42 kinase antibodies. The pellet was resuspended in 50 µl of kinase buffer supplemented with 200 µM ATP and 2 µg of Elk-1 fusion protein per reaction. Following 30 min of incubation at 30 °C, the reaction was terminated with 25 µl of 3x SDS loading buffer and boiled for 5 min. The samples were subjected to SDS-12% PAGE and Western blotted with polyclonal anti-phospho-Elk-1 antibodies. For Western blotting with anti-ERK antibodies, the cells were lysed directly in 100 µl of radioimmunoprecipitation buffer. After clarification, 50 µl of the lysate were mixed with 10 µl of 6x SDS loading buffer and boiled for 5 min. The samples were subjected to SDS-12% PAGE and Western blotted with either monoclonal anti-phospho-ERK1 or polyclonal anti-ERK1 antibodies at a 1:2000 dilution.
JNK and p38 AssaysThe levels of total and phosphorylated JNK and p38 in cell lysates were estimated by Western blotting with specific antibodies as described above. For these assays, control and ORF3 stable lines were also stimulated with 10 µg/ml anisomycin.
Yeast Two-hybrid AnalysisThe cloning of ORF3 in the Gal4 DNA-binding domain vector pAS2 has been described earlier (32). The N-terminal deletion mutant ORF3-(33123) was isolated as an EcoRI-HindIII fragment from plasmid pSGI-ORF3(
132) (20), end-filled with T4 DNA polymerase, and subcloned into BamHI-digested and end-filled pAS2. The full-length Pyst1 and its deletion mutants were cloned into the Gal4 activation domain vector pACT2 as follows. The full-length pyst1 gene was isolated as an
1.5-kb BamHI-XhoI fragment from pGEX4T-1/Pyst1 plasmid and subcloned into the same sites in plasmid pGEX5X; a BamHI-XhoI fragment from this clone was subsequently moved into similarly digested pACT2 to give plasmid pAD-Pyst1. The Pyst1-N670 mutant fragment was isolated as an
700-bp BamHI-XhoI fragment from pGEX4T-1/Pyst1(N670) and subcloned into pACT2 using the steps outlined above. The Pyst1-C696 mutant fragment was isolated as an
700-bp BamHI-XhoI fragment from pGEX4T-2/Pyst1(C696) and subcloned into pACT2 using the steps outlined above. The Pyst1-C450 mutant fragment was isolated as an
500-bp BamHI-XhoI fragment from pGEX5X-1/Pyst1(C450) and subcloned into similarly digested pACT2. The Pyst1-C400 mutant fragment was isolated as an
400-bp BamHI-NotI fragment from pGEX4T-2/Pyst-1(C400), end-filled with T4 DNA polymerase, and subcloned into XmaI-digested and end-filled pACT2. The Pyst1-C300 mutant fragment was isolated as an
300-bp XmaI-XhoI fragment from pGEX4T-3/Pyst1(C300), end-filled, and subcloned into SmaI-digested pACT2. The yeast two-hybrid analyses were carried out as described earlier (32) except that the Saccharomyces cerevisiae host strain AH109 (MATa, trp1901, leu23, 112, ura352, his3200, gal4
, gal80
, LYS2::GAL1UAS-GAL1TATA-HIS3, GAL2UAS-GAL2TATA-ADE2, URA3::MEL1UAS-MEL1TATA-lacZ) was utilized instead of the Y190 strain. The positive control included cotransformation with pAS2-SNF1 and pACT2-SNF4 vectors. The negative controls included mock-transformed AH109 cells or cells transformed separately with either pAS2-ORF3 or pACT2-Pyst1.
Microscopy and FRET AnalysisFor immunofluorescence staining and colocalization experiments, COS-1 cells were seeded at about 50% confluency on coverslips in 6-well plates, grown for 18 h, and then cotransfected with expression vectors for ORF3 and either Pyst1 or CL100. At 48 h post-transfection, the PBS-washed cells were fixed with 2% paraformaldehyde in PBS at room temperature for 10 min, permeabilized with methanol at -20 °C for 3 min, and then rehydrated with PBS for 20 min at room temperature. The cells were blocked with 5% normal goat serum for 2 h at room temperature and then incubated with polyclonal anti-HA tag antibodies and monoclonal anti-pORF3 antibodies at 1:50 or 1:100 dilutions in PBS, 0.5% Tween 20 (PBST) containing 1% normal goat serum for 2 h at room temperature. Cells were washed thrice with PBST for 5 min each and then incubated for 1 h at room temperature with conjugated secondary antibodies at a 1:1000 dilution. The secondary antibodies used were Alexa594-conjugated goat anti-rabbit IgG and Alexa488-coupled goat anti-mouse IgG (Molecular Probes). The cells were washed as above and mounted in 90% glycerol in PBS. Confocal images were collected using a 60x planapo objective in a Bio-Rad 1024 laser scanning microscope attached to a Nikon inverted microscope. The filter sets used were B2A for Alexa488 and Y-2E/C (Texas Red) for Alexa594.
For FRET analysis, COS-1 cells were plated on coverslips and transfected as described above with expression vectors for the ECFP and EYFP fusion proteins. Forty-eight hours post-transfection, the coverslips were washed with PBS, fixed in 4% paraformaldehyde for 15 min at room temperature, and washed once again in PBS. These were then mounted using Antifade (Bio-Rad) and sealed with a synthetic rubber-based adhesive, Fevibond (Fevicol, Pidilite Industries Ltd.). A planapo 60x numerical aperture/1.4 oil immersion objective (Nikon) with a 2100-radiance unit confocal microscope (Bio-Rad) was used for all experiments. Confocal images were acquired sequentially using the 457 nm (ECFP) and the 514 nm (EYFP) laser lines of the argon laser. Images of the ECFP emission were collected using a 500 DCLPXR dichroic mirror with an HQ 485/30 emission filter. The EYFP emission images were collected using a 560 DCLPXR dichroic mirror with an HQ 545/40 emission filter. FRET was detected using the acceptor photobleaching approach as follows. Cells expressing the ECFP and EYFP fusion proteins were first imaged sequentially followed by specific photobleaching of the acceptor fluorophore (EYFP) by 1015 min of continuous illumination with the 514 nm laser line at 500-lines/s speed with an 80% laser intensity. At the end of this time, cells were imaged sequentially once again to ensure complete photobleaching of EYFP. Laser Pix 2000 software (Bio-Rad) was used for quantitating the mean fluorescence intensity of ECFP in areas of colocalization before and after photobleaching. Changes in mean fluorescence intensity before and after photobleaching of areas where the two proteins did not colocalize served as a control. The increase in ECFP emission, which is a direct measure of FRET efficiency, was calculated as E% = (1 - (ECFP emission before EYFP photobleach/ECFP emission after EYFP photobleach)) x 100. For presentation, the original images were processed using Photoshop (Adobe Systems, Mountain View, CA).
Binding CompetitionThe competition between pORF3 and ERK for binding to Pyst1 was evaluated through an in vitro assay. Lysates were prepared from COS-1 cells either mock-transfected (control) or transfected with pSR-HA-Erk. Forty-eight hours post-transfection, the cells on each dish were lysed in 500 µl of lysis buffer containing 20 mM Tris acetate, pH 7.0, 1% Triton X-100, 0.27 M sucrose, 1 mM EDTA, 0.1% 2-mercaptoethanol, 1 mM sodium orthovanadate, 5 mM sodium fluoride, and the protease inhibitor mixture. Following clarification and protein estimation, lysates containing equal amounts of protein (up to 0.4 ml) were used in the competition assay. The pORF3 preparation was either made through coupled in vitro transcription-translation (35S-labeled, TNT system) or was purified from E. coli. Control TNT lysates or BSA was used as negative controls. The COS-1 cell lysates and pORF3 preparations were mixed, kept on ice for 2 h, and then mixed with glutathione-Sepharose beads containing about 5 µg of GST-Pyst1 (or GST alone as a control) bound to the beads. After end-on mixing for 60 min at 4 °C, the beads were processed as described above for GST pull-down. Proteins retained on beads were separated by SDS-12% PAGE and Western blotted with anti-HA tag antibodies to estimate retention of HA-tagged ERK. The pORF3 retained on beads was estimated by SDS-15% PAGE followed by fluorography to reveal 35S-labeled proteins.
In Vitro Phosphatase AssayThe phosphatase activity of GST-Pyst1 was measured in the presence of E. coli-expressed and purified His-tagged "kinase-dead" ERK or MEK1 (KD-ERK and KD-MEK, kind gifts of Dr. Gary Johnson, University of Colorado Medical School) and His-tagged pORF3. The GST-Pyst1 protein was expressed in E. coli DH5
cells according to standard procedures. The protein was purified by first binding to glutathione-Sepharose beads (Amersham Biosciences) followed by three washes with elution buffer containing 10 mM reduced glutathione in 50 mM Tris-HCl, pH 8.0. The KD-ERK and KD-MEK proteins were expressed in E. coli BL21(DE3) cells. The cell pellet from 500 ml of bacterial culture was resuspended in cold lysis buffer (50 mM sodium phosphate, pH 8.0, 100 mM KCl, 0.1% Tween 20, 10 mM (v/v) 2-mercaptoethanol, 5 µg/ml leupeptin, 2.1 µg/ml aprotinin) and lysed by freeze/thawing followed by sonication. The lysate was clarified by centrifugation at 10,000 rpm in a Sorvall SS34 rotor for 30 min at 4 °C. The clear supernatant was mixed with 0.5 ml of nickel-nitrilotriacetic acid-agarose (Qiagen, Valencia, CA) in a rocker for 1 h at 4 °C. The beads were washed three times with 10 ml of lysis buffer, pH 8.0, followed by three times with 10 ml of lysis buffer, pH 6.3. The bound proteins were eluted with 3 x 1 ml of lysis buffer, pH 4.5. The eluate was dialyzed against 50% glycerol, 10 mM HEPES, pH 7.2, 1 mM EDTA, 0.1% mercaptoethanol, 0.025% Triton X-100, 2.1 µg/ml aprotinin and stored frozen. The His-tagged pORF3 was purified as described previously (20). The phosphatase assays were carried out using p-nitrophenyl phosphate as a substrate. To 200 µl of reaction mixture containing 50 mM Tris-HCl, pH 7.4, 5 mM dithiothreitol, 20 mM p-nitrophenyl phosphate, 5 µg each of GST-Pyst1, KD-ERK, or KD-MEK1 (as a control) and pORF3 or BSA (as a control) were added. The reaction was carried out in a 96-well plate at 25 °C in a microplate reader (TECAN Rainbow) and monitored at 405 nm over a 6-h period. Phosphatase assays on transfected cell lysates were carried out as described here but with lysates equivalent to 2 µg of protein in the presence of either 15 µg of BSA or purified recombinant ORF3 protein expressed in E. coli. Triplicate reactions were carried out as described above and monitored over a 4-h period. Two independent transfection-based in vitro phosphatase activity experiments were carried out.
| RESULTS |
|---|
|
|
|---|
6.5 and
3.5 times, respectively, compared with the control cell line (Fig. 1A, lanes 5 and 6). In this cellular background, no activation of p38 was observed in either the control or ORF3 stable lines with or without anisomycin. That the phospho-p38 antibody was functional was established in separate experiments (not shown).
|
-32P]ATP. Similarly the effect of LY294002 was assayed by its ability to inhibit Akt phosphorylation following insulin stimulation of serum-starved cells. The phosphorylation of Akt was detected by Western blotting with anti-phospho-Akt antibodies. Lysates from cells treated with Genistein or control cells were subjected to Western blotting with anti-phosphotyrosine antibodies to evaluate the effects of this inhibitor. Stable cell lines expressing pORF3 or an appropriate vector control were treated with increasing concentrations of the various inhibitors, and the cell lysates were quantitated for ERK activity using three independent assays. Immunocomplex kinase assays were carried out using MBP or the transcription factor Elk-1 as an ERK substrate, and Western blotting was carried out for the phosphorylated form of ERK. The total ERK protein present in cell lysates was estimated by Western blotting with an ERK-specific antibody. Using various assays, the activity of ERK was found to be 430 times greater in pORF3-expressing cells compared with control cells under conditions of serum starvation and 1.54 times greater in the presence of 10% serum (Fig. 2, lanes 14). Among the various inhibitors tested, only U0126 when used at 5 times its IC50 value showed a 3040% reduction in ERK activity (Fig. 2, lanes 58). Controls showed no significant difference in the levels of total ERK protein following treatment with serum or inhibitors (Fig. 2, bottom panel). These results showed that pORF3-mediated ERK activation was only partially dependent on the Raf/MEK pathway and was independent of the PI3K/Akt pathway, protein kinase C activation, and intracellular calcium signaling. The lack of inhibition by Genistein (Fig. 2, lanes 2224) further showed no significant effect of tyrosine kinases. Taken together, these observations suggested a novel mechanism for pORF3-mediated ERK activation.
|
We tested the ability of pORF3 to bind to CL100 and Pyst1, prototypic members of the MKP-1 and MKP-3 subclasses, respectively (2729). COS-1 cells were transiently transfected with vectors expressing ORF3 and a HA-tagged CL100 or Pyst1. Cells were metabolically labeled with [35S]methionine-cysteine, and the cell lysates were immunoprecipitated with antibodies to either pORF3 or the HA tag. pORF3 as well as the HA-tagged CL100 (Fig. 3A, lanes 14) or Pyst1 (Fig. 3B, lanes 14) proteins were immunoprecipitated with anti-pORF3 antibodies. Similarly antibodies to the HA tag immunoprecipitated the HA-CL100 or HA-Pyst1 proteins as well as pORF3 (Fig. 3, A and B, lanes 69). These co-immunoprecipitation results suggest that pORF3 interacted physically with the CL100 and Pyst1 proteins. Interaction between pORF3 and the MKPs was further substantiated by immunofluorescence colocalization of these proteins. COS-1 cells were cotransfected as described earlier, and the cells were doubly stained for pORF3 and the HA-tagged CL100 or Pyst1 proteins. The localization of pORF3 was found to be cytosolic with punctate and often perinuclear distribution. It has been shown that while MKP-1 is localized to the nucleus (27), MKP-3 shows exclusive cytosolic localization (26, 28). We also observed a nuclear distribution for CL100, a cytosolic distribution for Pyst1, and colocalization of pORF3 and Pyst1 in the cotransfected cells (not shown). Thus, while pORF3 showed in vitro binding to both MKP-1 and MKP-3, only its interaction with the latter is expected to have any functional significance.
|
|
|
-galactosidase assay either qualitatively on colony lifts or quantitatively in liquid phase. The relative strength of a true interaction was also judged by growth of transformed AH109 cells on His- plates containing increasing concentrations of 3'-aminotriazole. The positive control proteins SNF1 and SNF4 showed interaction based on growth on His- plates in the presence of up to 10 mM 3'-aminotriazole; the negative control single transformants or untransformed AH109 cells did not show growth on His- plates. Full-length ORF3 protein displayed a positive interaction phenotype with full-length Pyst1 as well its deletion mutants N670, C450, and C400. The interaction with Pyst1 C696 and C300 deletion mutants could not be tested conclusively. While the AD-C696 plasmid could not be cotransformed reproducibly into AH109 cells, the AD-C300 plasmid showed promoter transactivation and growth on His- plates on its own in the absence of any BD-ORF3 plasmid (results not shown). The ORF3-(33123) N-terminal deletion mutant showed significantly weaker interaction with Pyst1 as the cotransformants failed to grow on His- plates containing 10 mM 3'-aminotriazole. This was also evident from the liquid
-galactosidase assay results. This assay also showed higher values for the interactions between full-length ORF3 and the C450 or C400 deletion mutants of Pyst1 compared with full-length Pyst1. This may be due to either higher expression levels or better folding of the truncated Pyst1 fusion proteins, resulting in increased exposure of the binding surface. Overall the yeast two-hybrid analysis confirmed the results obtained with the co-immunoprecipitation and GST pull-down assays described under "The ORF3 Protein Binds MAPK Phosphatase."
|
|
|
|
|
|
|
| DISCUSSION |
|---|
|
|
|---|
), and protein kinase C (phospholipase C
) pathways. The interactions involved a C-terminal proline-rich motif in pORF3 and the SH3 domains in the cellular proteins. We also showed that in cells stably expressing pORF3 as well as in transiently transfected cells there was increased activity of ERK (20). Furthermore pORF3-expressing cells showed increased nuclear translocation of the phosphorylated (and activated) form of ERK. In the case of other members of the MAPK family, JNK and p38, pORF3 appeared to enhance the expression levels of these proteins. In the ORF3 stable lines, while JNK activation was still responsive to a stress signal such as anisomycin, no activation of p38 was observed. The effects of pORF3 on the JNK and p38 pathways will be investigated separately. In this study we investigated the mechanism of pORF3-mediated ERK activation. The activation of ERK follows sequential phosphorylation and activation of the upstream kinases MEK and Raf-1 following receipt of mitogenic signals at the cell surface (23). This pathway can also be activated by the phosphorylation of Raf-1 by protein kinase C (45), through activation of the PI3K/Akt pathway (4648), or through increased calcium mobilization from intracellular pools in the endoplasmic reticulum (49). As a first step toward elucidating the mechanism of pORF3-mediated ERK activation, we used chemical inhibitors of various pathways and studied their effect on ERK activity. The MEK inhibitor U0126 only partially inhibited ERK activity at a concentration of 5 times its IC50 value, suggesting this to be, at best, a minor pathway of pORF3-mediated ERK activation. Inhibitors of the PI3K/Akt pathway, the protein kinase C pathway, or intracellular calcium mobilization as well as a generic protein-tyrosine kinase inhibitor also did not block pORF3-mediated ERK activation. These results suggested a mechanism that was distinct from a kinase-directed activation of ERK.
MAPK activation is triggered by phosphorylation of specific threonine and tyrosine residues localized within its activation loop by upstream kinases. This activation is transient and reversible; inactivation is achieved by dephosphorylation of the specific residues by dual specificity MKPs. Here we present results of in vitro experiments to show that pORF3 binds CL100 and Pyst1, prototypic members of the MKP-1 and MKP-3 subfamilies of these phosphatases, respectively (27, 2930). Deletion mapping studies showed both these proteins to bind the same region of pORF3. Since MKP-3 is the ERK-specific phosphatase and its cellular localization like that of pORF3 is cytoplasmic, we concentrated our studies on the Pyst1-pORF3 association. This interaction was further confirmed with the yeast two-hybrid system (50).
Results of the in vitro interaction between these proteins were confirmed by in vivo FRET measurements (43, 5153) using ECFP (donor) and EYFP (acceptor) fused upstream to pORF3 and Pyst-1, respectively. Since FRET efficiency between two molecules decreases by the sixth power of the distance between them (43), the presence of FRET indicates an actual protein-protein interaction. Simple colocalization of two proteins is not sufficient to yield energy transfer, and FRET represents a powerful indicator of in vivo protein-protein interaction (43, 5153). The ECFP-EYFP pair is a commonly used donor-acceptor pair ideally suited for FRET measurements (43). FRET exploits the ability of the higher energy donor fluorophore (ECFP) to transfer some of its energy to the acceptor fluorophore (EYFP) in its excited state under optimum conditions of spectral overlap and Forster's radius (43). Following FRET, there is a reduction in the donor emission due to the transfer of energy and an increase in the acceptor emission. However, in the acceptor photobleaching method used here, after photobleaching of the EYFP acceptor, there should be an increase in emission from the ECFP donor if FRET is taking place. This is because the acceptor fluorophore is no longer able to quench the donor emission. Based on this method, we show here significant FRET efficiency between ECFP-ORF3 and EYFP-Pyst1, supporting the in vitro results that pORF3 and Pyst1 interact with each other. The FRET studies carried out here also support our earlier results showing dimerization of pORF3 (42).
The MKPs are composed of a divergent N-terminal substrate-binding region and a conserved C-terminal catalytic domain. The N-terminal region containing two Cdc25 phosphatase-like domains is responsible for selective docking of the MAPKs (54). The catalytic domain by itself does not show strict selectivity in dephosphorylating various members of the MAPK family (55, 56). Through selective MAPK binding, the N-terminal domain plays a major role in this selectivity. Structural analysis of the N-terminal domain of MKP-3 (57) and biochemical analysis of the MAPK docking surface on MKPs (58) reveal a direct interaction surface for ERK. The docking surface is proposed to contain three modules that include two clusters of positively charged amino acids flanking a cluster of hydrophobic amino acids (58). This modular structure would fit well within the docking groove on MAPKs and is proposed to confer binding specificity between various MKPs and their substrate MAPKs.
The catalytic activation of MKPs requires binding to the cognate MAPKs. The ERK-induced activation of MKP-3 requires the N-terminal ERK-binding (EB) domain of MKP-3. The catalytic domain alone has very low phosphatase activity, and it cannot be directly activated by ERK (59), suggesting that intimate coupling of the N- and C-terminal domains is required for an allosteric effect on the active site conformation of MKP-3. Such has also been suggested by the crystal structure of the MKP-3 catalytic domain (60). It has been proposed from the NMR structure of the EB domain of MKP-3 (57) that the enzyme exists in a low activity state in which key active site residues within the C-terminal catalytic domain are disengaged from enzymatic catalysis. Binding of ERK to the N-terminal EB domain alters intramolecular interactions between the N- and C-terminal domains of MKP-3. This conformational change results in a restructuring of the active site leading to a catalytically active MKP-3. This study also showed that EB domain constructs that contained the linker sequence between the N- and C-terminal domains exhibited higher binding affinity to ERK than those that contained the minimal EB domain (57). Although the linker sequence is not part of the EB domain, its functional coupling to the EB domain may be critical for ERK-induced activation of MKP-3. Our mapping results show that pORF3 binds predominantly to this linker region of Pyst1 (amino acids 150228). However, binding was also observed within the region of amino acids 229283 of Pyst1. This region includes the critical Asp-262 residue used as a proton donor for the phenolic (tyrosine) or hydroxyl (threonine) oxygen of the leaving group (60). Thus, pORF3 would be predicted to interfere with the ERK-mediated activation as well as with the catalytic function of Pyst1.
The N-terminal region of pORF3 encompassing amino acids 1-32 is shown here to be responsible for its interaction with MKPs. Previously we have shown the same region to be required for association of pORF3 with cytoskeletal and membrane components of cells (11). Although pORF3 has an isoelectric point of
10.5, it predominantly contains prolines and hydrophobic residues with only 2.4% acidic residues. The N-terminal region is largely hydrophobic with an unusual concentration of cysteines in the region of amino acids 2031. Complementary to this, the Pyst1 region encompassing amino acids 150283 shows 13.5% acidic residues,
6% basic residues, and a predominance of amino acids with neutral and hydrophobic side chains. The region of amino acids 150229 in Pyst1 that provides the major binding surface for pORF3 contains 15% acidic residues and only 4% basic residues. Present within this region is an acidic stretch, DIESDLDRD (amino acids 179187), as well as a hydrophobic stretch, PLPVL-GLGGL (amino acids 161170). These characteristics of the cognate binding regions of the two proteins suggest that the binding energy is largely contributed by hydrophobic and electrostatic interactions.
The functional relevance of pORF3-Pyst1 interaction for ERK activation was addressed through two different types of experiments. In the first approach we assessed the ability of ORF3 mutants to activate ERK. While pORF3 mutants lacking the C-terminal proline-rich motifs had no effect on ERK activation, the N-terminal deletion mutant lacking amino acids 132 of pORF3 was deficient in ERK activation. This N-terminal region is also the region through which pORF3 binds MKPs. There was, however, no measurable competition between ERK and pORF3 for binding to Pyst1. In the second approach, we evaluated ERK activity in cells ectopically expressing CL100 (MKP-1) or Pyst1 (MKP-3) in the absence or presence of pORF3. These experiments showed reduced ERK activity in cells expressing Pyst1. However, co-expression of pORF3 and Pyst1 protected ERK activity from the inactivating effects of the latter. Western blotting also showed similar results wherein phospho-ERK levels were higher in cells expressing pORF3. Together these results prove that the pORF3-directed ERK activation is due to the ability of pORF3 to bind the ERK-specific phosphatase MKP-3.
In vitro phosphatase assays carried out on lysates of transfected cells showed a direct inhibitory effect of the ORF3 protein on MKP-3 phosphatase activity. That an excess of pORF3 was required to inhibit MKP-3 activity in vitro was supported by other observations, including Western blotting of the cell lysates for anti-phospho-ERK. This might reflect that dimeric (or oligomeric) forms of pORF3 are required to bind and inhibit MKP-3. The binding of pORF3 dimers to Pyst1 and earlier observations on pORF3 dimerization (42) would support this premise.
Based on our results, we propose a model for the ERK activating property of pORF3 (Fig. 12). Activated ERK, phosphorylated at threonine and tyrosine within the TXY motif, can bind to MKP-3 through an N-terminal EB domain in the latter. This binding is known to result in a conformational change that brings the MKP-3 catalytic domain in close proximity to the phosphothreonine and phosphotyrosine residues resulting in their dephosphorylation and inactivation of ERK (59, 60). We show here that pORF3 binds to the linker region between the EB and catalytic domains of MKP-3. While this interaction would not preclude binding of ERK to MKP-3, it is likely to interfere with the conformational change in MKP-3 necessary for bringing its catalytic domain close to the phosphorylated residues. This would result in inhibition of ERK dephosphorylation (and inactivation) by MKP-3.