Characterization of a Thermostable UvrD Helicase and Its Participation in Helicase-dependent Amplification*

Helicase-dependent amplification (HDA) is an isothermal in vitro DNA amplification method based upon the coordinated actions of helicases to separate double-stranded DNA and DNA polymerases to synthesize DNA. Previously, a mesophilic form of HDA (mHDA) utilizing the Escherichia coli UvrD helicase, DNA polymerase I Klenow fragment, two accessory proteins, MutL and single-stranded DNA-binding protein (SSB), was developed (1). In an effort to improve the specificity and performance of HDA, we have cloned and purified a thermostable UvrD helicase (Tte-UvrD) and the mutL homolog (Tte-MutL) from Thermoanaerobacter tengcongensis. Characterization of the Tte-UvrD helicase shows that it is stable and active from 45 to 65 °C. We have found that the Tte-UvrD helicase unwinds blunt-ended DNA duplexes as well as substrates possessing 3′- or 5′-ssDNA tails. Tte-UvrDwasusedtodevelopathermophilichelicase-dependent amplification (tHDA) system to selectively amplify target sequences at 60–65 °C. The tHDA system is more efficient than mHDA, displaying heightened amplification sensitivity without the need for the MutL and SSB accessory proteins. Amplification independent of MutL corresponds with studies demonstrating that maximal Tte-UvrD helicase activity does not require the mutL homolog. The tHDA system allows for rapid amplification and detection of targets present in genomic DNA. The expeditious nature and simplistic design of the tHDA platform makes the technology ideal for use in diagnostic applications requiring rapid identification of organisms at the point-of-need.

DNA helicases use the energy generated by the hydrolysis of nucleoside triphosphate to break the hydrogen bonds linking the two strands together in duplex DNA (2). Helicases are involved in a myriad of cellular processes requiring the manipulation of DNA, including replication, repair and recombination, because of the ability of these enzymes to allow access to the buried nucleotide sequence (3). The well studied Escherichia coli UvrD helicase (helicase II) unwinds DNA in a 3Ј to 5Ј direction (4). Unlike many other helicases, the UvrD helicase is capable of melting fully duplex molecules (DNA fragment with blunt ends) as well as nicked circular DNA molecules (5). In E. coli cells, UvrD is recruited to a site containing an erroneously incorporated nucleotide to unwind the DNA for corrections to be made during methyl-directed mismatch repair (6) and UvrABCmediated nucleotide excision repair (7). Direct physical interactions between UvrD and MutL, the master coordinator of the mismatch repair pathway, have shown that MutL dramatically stimulates UvrD helicase activity (8 -10).
Although several homologs of the E. coli uvrD helicase have been identified and characterized from many bacteria, relatively few uvrD homologs have been described from thermophilic organisms. Expression of the Thermus thermophilus uvrD homolog has been shown to partially compensate for the repair function of E. coli UvrD, suggesting that the function of the helicase is evolutionarily conserved (11). Characterization of this protein indicates that the T. thermophilus UvrD possesses a 3Ј-5Ј DNA helicase activity similar to the E. coli UvrD (12). In addition, another homolog of the uvrD helicase has been purified from Bacillus stearothermophilus (13). It was named Bst pcrA because of its sequence homology to the pcrA helicase in Staphylococcus aureus (13). Studies of two accessory proteins, ribosomal protein L3 and replication initiator protein RepD, have been shown to enhance Bst PcrA unwinding activity, much like the MutL stimulation of UvrD helicase activity in E. coli (14,15). The stimulatory effect of MutL on UvrD has not been demonstrated to be a universal feature or species specific with uvrD homologs.
Here we report the cloning and characterization of the UvrD and MutL proteins from a fully sequenced thermophilic bacterium, Thermoanaerobacter tengcongensis (16). The helicase activity of the Tte-UvrD is described, as are the effects of the Tte-MutL protein on unwinding reactions catalyzed by Tte-UvrD helicase. Previously, we have developed an isothermal DNA amplification method using the UvrD helicase from E coli (1). Unlike the polymerase chain reaction (PCR) that is dependent on heat to separate double-stranded DNA, double-stranded DNA in helicase-dependent amplification (HDA) 1 reactions are separated into two single strands by a helicase and, thus, enables the amplification reaction to be performed at a constant temperature. In this study, we have tested the ability of thermostable helicases to support thermophilic HDA reactions at higher temperatures, to simplify the reaction components and improve detection sensitivity. Cloning and Purification of Tte-UvrD and Tte-MutL-Oligonucleotide primers were designed to amplify the Tte uvrD gene from T. tengcongensis according to the published sequence (16). The forward primer TUF (5Ј-ATACATATGATTGGAGTGAAAAAGATGAA-3Ј) included an NdeI site and the reverse primer TUR (5Ј-AAATAAGCTCTTCAGCAA-GAAATTGCCTTAATAGGAG-3Ј) included a SapI site. The PCR product was first cloned into the pCR2.1-TOPO vector. After screening and sequencing, the correct construct was digested with NdeI and SapI, inserted into the pTYB1 expression vector, and transformed into E. coli ER2502 cells (17). The sequence of the pTYB1-Tte-UvrD construct was verified and then transformed into E. coli ER2566 cells for overexpression.

Bacterial
E. coli cells harboring the pTYB1-Tte-UvrD expression plasmid were grown at 37°C until OD 600 reached 0.5-0.8. Tte-UvrD protein expression was induced using 0.4 mM isopropyl-␤-D-thiogalactopyranoside at 15°C for 12ϳ14 h. All subsequent procedures were performed at 4°C except when noted. 20 grams of cells were resuspended in Buffer C (20 mM Tris-HCl, pH 8.0, 500 mM NaCl, 1 mM EDTA) and lysed by sonication. The clarified lysate was applied to a 15-ml column of chitin beads pre-equilibrated with buffer C at a flow rate of ϳ0.5-1 ml/min. The column was washed with 10 column bed volumes of buffer C and then washed with three bed volumes of buffer C containing 50 mM dithiothreitol at a flow rate of 2 ml/min. Following incubation for 16 h at 16°C, the cleaved Tte-UvrD protein was eluted with buffer C, and 1-ml fractions were collected. Fractions containing protein were pooled and dialyzed against buffer A (20 mM potassium phosphate, pH 6.9, 0.1 mM EDTA, 6 mM 2-mercaptoethanol, 5% v/v glycerol) supplemented with 50 mM NaCl. The dialyzed Tte-UvrD was further purified using the HiTrap Heparin HP column pre-equilibrated with buffer A supplemented with 50 mM NaCl. Protein was eluted from the column with a linear gradient of 0.05-1 M NaCl in buffer A. Protein eluted at a conductivity equivalent to that of buffer A ϩ 0.5 M NaCl. Fractions containing the Tte-UvrD protein were analyzed by SDS-PAGE, stained with Coomassie Blue, and scanned and quantified using Quantity One 4.4.1 software to verify the purity of the protein. The purified Tte-UvrD was dialyzed against a storage buffer (20 mM Tris-HCl, pH 7.4, 200 mM NaCl, 1 mM EDTA, 1 mM dithiothreitol, 50% v/v glycerol), and aliquots were stored at Ϫ80°C.
The Tte-MutL was amplified from genomic DNA by PCR using the forward primer TMF (5Ј-ATACATATGAATAAAATTCATCTTCTC-GACGA-3Ј) and the reverse primer TMR (5Ј-AAATATGCTCTTCAG-CACTTGATTCGTTTAACATCTTCTCAA-3Ј). The restriction enzyme sites, NdeI and SapI, were engineered into the forward and reverse primers, respectively, to clone the Tte-MutL gene into the expression plasmid pTYB1. The pTYB1-Tte-MutL construct was expressed in ER2566 cells and purified using the procedure described above for Tte-UvrD.
ATPase Assays-The hydrolysis of ATP was detected by measuring the release of inorganic phosphate with acidic ammonium molybdate and malachite green (19). Reactions were performed using 100 ng/l bovine serum albumin, 3 mM ATP, 6.25 ng/l M13 ssDNA, 5 mM Mg(OAc) 2 , with varying amounts of Tte-UvrD protein at the indicated temperatures. Reactions were performed in ThermoPol buffer (20 mM Tris-HCl, pH 8.8, 10 mM KCl, 10 mM (NH 4 ) 2 SO 4 , 2 mM MgSO 4 , 0.1% Triton X-100), and preincubated at the indicated temperatures for 2 min prior to the addition of the helicase. A parallel reaction was performed without helicase as a negative control. Incubation was continued to each specified time, wherein 10 l of the reaction mixture was removed and added to 800 l of the ammonium molybdate (1.05% w/v)/malachite green (0.3% w/v) reagent. Each sample was incubated with the ammonium molybdate/malachite green reagent for 1 min at room temperature and then 100 l of 34% w/v sodium citrate solution was added. After 20 min of continual incubation at room temperature, the absorbance at 660 nm was measured.
Helicase Assays-The DNA substrates used in this study were composed of four oligodeoxynucleotides: a fixed 23-mer top strand (5Ј-GCCCTGCTGCCGACCAACGAAGG-3Ј) and three different bottom strands to produce either the 3Ј-ssDNA tailed (5Ј-ACCTTCGTTG-GTCGGCAGCAGGGC-(dT) 40 -3Ј), the blunt-ended (5Ј-ACCTTCGTTG-GTCGGCAGCAGGGC-3Ј), or the 5Ј-ssDNA tailed (5Ј-(dT) 40 -ACCT-TCGTTGGTCGGCAGCAGGGC-3Ј) duplex as depicted in Table I. The ssDNA regions, either the 3Ј-or 5Ј-tails, were composed entirely of oligodeoxythymidylates to avoid intramolecular base pairing within the single-stranded region (20). The top and bottom oligonucleotides were mixed in ThermoPol Buffer at a 1:1.5 molar ratio. The annealing mixture was heated at 95°C for 2 min and then slowly cooled to 25°C over a period of 70 min. The annealed duplex was radioactivity labeled by filling one nucleotide in at the 3Ј-end of the top strand with [␣-32 P]dTTP using Klenow fragment (3Ј-5Ј exo Ϫ ). The labeled duplexes were then purified by QIAquick Nucleotide Removal kit to remove any unincorporated nucleotides.
Helicase assay reactions were performed by mixing 0.25 nM radiolabeled DNA duplex, 3 mM ATP, and differing amounts of Tte-UvrD in ThermoPol buffer in a total volume of 20 l. Reactions were preincubated at 55°C for 2 min and were initiated by the addition of ATP and incubated at 55°C for the indicated length of time. Reactions were terminated by the addition of 5 l of the stop solution (0.25% bromphenol blue, 25% glycerol, 1% SDS, 100 mM EDTA). A positive control assay was performed by incubation of the DNA substrate at 95°C for 15 min in the absence of helicase to completely denature the DNA substrate. A negative control containing intact DNA substrate in the absence of helicase was performed in parallel with the sample reactions. Samples were resolved in a 20% Tris borate/EDTA gel and radioactively labeled bands were quantified using Molecular Imager FX (Bio-Rad) and Quantity One 4.4.1 software.
HDA Assays-HDA assays were performed by creating two reaction mixes, mixture A and mixture B. Mixture A contains the DNA substrate (various concentrations of either plasmid DNA or bacterial genomic DNA), primers (25-50 nM of each primer), 3.5 mM MgSO 4 , 1ϫ ThermoPol II buffer, and ddH 2 O to a volume of 25 l. Mixture B contains 1ϫ ThermoPol II buffer, 200 M dNTPs, 3 mM dATP, 20 units of Bst polymerase, 100 ng of Tte-UvrD helicase, Ϯ 200 ng of Tte-MutL, and ddH 2 O to a volume of 25 l. Mixture A is heated to 95°C for 3-5 min then cooled to 65°C for 3 min when needed. Mixture B is added to mixture A, and the reactions were incubated at 65°C for various amounts of time. Reactions were terminated by the addition of 12.5 l of stop buffer (0.1% sodium dodecyl-sulfate, 50 mM Na 2 EDTA, 15% Ficoll, and 0.2% orange G), and 10 -15-l aliquots of the reactions were separated on a 2% GPG LMPagarose gel containing ethidium bromide. The plasmid used in this study was pAH1, derived from the pUC19 plasmid. The primers for the plasmid system were as follows: forward primer: 5Ј-GTGAGCGGATAACAATT-TCACACAGGA-3Ј and reverse primer: 5Ј-CGCCAGGGTTTTCCCAGT-CACGAC-3Ј. Primers for bacterial genomic DNA amplification were as follows: Neisseria gonorrhoeae piv Ng forward primer: 5Ј-GCAAAGTTTGA-CAACGATTCAAAAGGTTT-3Ј and reverse primer: 5Ј-TTGCCTCCATG-CAGATATGCAGATTCT-3Ј.

RESULTS
Cloning and Purification of Tte-UvrD and Tte-MutL-Analysis of the T. tengcongensis genome sequence revealed the presence of E. coli uvrD and mutL homologs (16). Tte-UvrD shares 42.9% sequence identity with E. coli UvrD at the amino acid level; however, the Tte-MutL shares a lower (29.5%) but still significant amino acid sequence identity with MutL in E. coli. The corresponding genes encoding Tte-UvrD and Tte-MutL were amplified from T. tengcongensis by PCR and inserted into the expression vector pTYB1 under the control of the T7 promoter. The proteins were purified using an intein fusion method that allows for self-cleavage on chitin columns (17). The proteins were further purified over a heparin column. Tte-UvrD and Tte-MutL proteins were found to be about 90% pure based on polyacrylamide gel electrophoresis and had apparent molecular masses of 83 and 67 kDa, respectively, which is in agreement with the calculated molecular weights of 82,800 (Tte-UvrD) and 67,200 (Tte-MutL) (Fig. 1).
Temperature Optima and Thermal Stability-The temperature range of the hot spring that T. tengcongensis was isolated from fluctuates from 50 to 80°C; therefore, the Tte-UvrD helicase was expected to be stable and active at elevated temperatures (16). To determine the optimal temperature for maximal Tte-UvrD activity, we utilized a colorimetric assay to directly measure the amount of inorganic phosphate released by the ATPase activity of Tte-UvrD over a range of temperatures. Helicase activity was assessed by incubating reactions at temperatures ranging from 40 to 75°C for 8 min and measuring the absorbance of each sample at 660 nm. The absorbance at each temperature was expressed as a percentage of remaining activity relative to the highest absorbance in each assay group. Analysis of the data from the ATPase assay showed that ATP hydrolysis occurred over a broad temperature range (from 45 to 65°C) and reached a maximum at 55°C (Fig. 2A). The ATPase assay was repeated using several different incubation times (2, 4, or 10 min), and similar results were obtained from each assay (data not shown). The thermal stability of Tte-UvrD was determined by incubating the helicase at 65 or 70°C for differing amounts of time and then assaying for ATPase activity with substrates at the experimentally determined optimal temperature of 55°C for 10 min. The percentage of remaining ATPase activity at 65 or 70°C was plotted as a function of time and demonstrated that Tte-UvrD was relatively stable at 65°C and lost 30% of ATPase activity after 90 min of continuous incubation at 65°C. The protein was much less stable at 70°C and displayed a half-life of ϳ12 min. After incubating at 70°C for 1 h, ϳ90% of Tte-UvrD activity was abolished (Fig. 2B). Similar findings in the thermophilic bacterium T. thermophilus have been observed when analyzing the optimal temperature for UvrD helicase activity at temperatures above 70°C (12). Considering the natural habitat of T. tengcongensis reaches temperatures as high as 80°C, the loss of activity at 70°C is an interesting observation and suggests that the helicase may require accessory proteins to function at higher temperatures.
Unwinding Activity of Tte-UvrD-The unwinding reaction catalyzed by the Tte-UvrD helicase has been analyzed using an in vitro assay to measure the displacement of a radiolabeled 24-mer DNA strand from a DNA duplex in which the complementary strand is unlabeled. Three different duplex substrates were designed for the unwinding assay (Table I and Refs. 20  and 21). To test the suitability of these substrates, the unwinding assay was initially performed using the well-characterized E. coli UvrD protein. Our results showed that the E. coli UvrD was capable of unwinding all three substrates, with a strong preference for the substrate containing a 3Ј-ssDNA tail (data not shown), in agreement with published observations (4,5). In addition, we also observed that the E. coli MutL protein significantly stimulated E. coli UvrD unwinding activity (data not shown), observations that are consistent with previous reports by Yamaguchi et al. (9) and Mechanic et al. (10).
After characterization of the substrates with the E. coli UvrD, unwinding assays were performed using a range of Tte-UvrD protein concentrations (0.25-16 nM) to unwind a fixed concentration of duplex substrate (0.25 nM). When the 3Ј-ssDNA tailed duplex was used, unwound single-stranded product increased as a function of increasing enzyme concentration (Fig. 3A). In parallel unwinding assays, Tte-UvrD displayed a significant unwinding activity toward blunt-ended (Fig. 3B) and 5Ј-ssDNA tailed duplex (Fig. 3C). Although Tte-UvrD was capable of unwinding all three substrates, slightly higher activity was displayed with the 3Ј-ssDNA tailed substrate as compared with either the blunt-ended or 5Ј-ssDNA tailed substrates. For example, in the presence of 4 nM Tte-UvrD, more than 85% of the 3Ј-ssDNA tailed duplex was separated and less  2. A, ATPase activity assays of the Tte-UvrD helicase at different temperatures. ATPase assays were performed as described under "Materials and Methods." Each reaction consisted of 36 nM Tte-UvrD, incubated at the indicated temperature for 8 min. The absorbance at each temperature was expressed as a percentage of remaining activity relative to the highest absorbance in each assay group. B, thermal stability of Tte-UvrD helicase by ATPase assay. Tte-UvrD was diluted in ThermoPol buffer and incubated at 65 or 70°C for the indicated time. 2 l of protein were taken out for ATPase assays performed as described under "Materials and Methods." Each reaction consisted of 36 nM Tte-UvrD, incubated at 55°C for 10 min. The absorbance at each temperature was expressed as a percentage of remaining activity relative to the highest absorbance in each assay group.  than 70 and 60% of the blunt-ended or 5Ј-ssDNA tailed duplexes, respectively, were unwound (Fig. 3D). Unlike the E. coli UvrD, Tte-UvrD has only a marginal preference toward the 3Ј-ssDNA tailed duplex and is able to effectively unwind all three types of substrates (4,5). The results remained consistent over the broad range of Tte-UvrD concentrations analyzed.
To address the efficiency of the unwinding reaction, we also performed a time course assay with the Tte-UvrD protein. After 4 min of reaction time, 66.5% of the 3Ј-ssDNA tailed duplex was unwound and in contrast, 46.1% of the blunt-ended and 45.2% of the 5Ј-ssDNA tailed duplexes were separated (Fig.  4). After 16 min, the unwinding assay had plateaued, and increasing the incubation time did not further increase the displacement of the labeled strand. At this protein/DNA ratio (r ϭ 8; Tte-UvrD 2 nM, DNA duplex 0.25 nM), Tte-UvrD was able to maximally unwind 90% of the 3Ј-ssDNA tailed duplex and 71% of the blunt-ended or 5Ј-ssDNA tailed duplexes (Fig.  4). Although Tte-UvrD unwinds all three types of substrates, the efficiency of the reaction is higher with the 3Ј-ssDNA tailed duplexes. Taken together, the data from the concentration and time course assays support the observation that the Tte-UvrD helicase is capable of unwinding all substrates analyzed, with only a marginal preference for the 3Ј-ssDNA tailed duplex.
The Effect of MutL on UvrD Unwinding Activity-In E. coli, MutL targets and loads UvrD onto the DNA substrate and thereby enhances the unwinding activity of UvrD more than 10-fold (9,10). To test whether Tte-MutL can similarly stimulate the unwinding reaction catalyzed by Tte-UvrD, increasing amounts of Tte-MutL was added to unwinding assays. The results indicate that the Tte-MutL did not have a significant effect on unwinding of blunt-ended and 5Ј-ssDNA tailed duplex substrates catalyzed by Tte-UvrD (Fig. 5). For the 3Ј-ssDNA tailed duplex, a low level of stimulation (Ͻ30%) was observed when the molar ratio of Tte-MutL to Tte-UvrD reached 32 or 64 (Tte-UvrD 0. ratios and consistent results were observed. Stimulation of the UvrD unwinding activity by MutL is much less in T. tengcongensis (Ͻ30%) than for E. coli (Ͼ10-fold; Refs. 9 and 10), 2 suggesting that the stimulation of UvrD unwinding activity may be specific to the mesophilic system.
To test whether MutL from other thermophilic bacteria stimulate their corresponding UvrD helicase activity, we have cloned and purified a pair of MutL and UvrD homologs from the partially sequenced B. stearothermophilus strain (GenBank TM accession number: NC_002926). The Bst-UvrD helicase shares 91.4% amino acid sequence identity with the previously characterized Bst PcrA helicase (13). In addition, Bst-UvrD also shares 43.6 and 53.9% sequence identities with E. coli UvrD and Tte-UvrD, respectively. The corresponding Bst-MutL protein shares 32.3 and 38.9% sequence identity with E. coli MutL and with Tte-MutL, respectively. The purified Bst-UvrD with the Bst-MutL was also capable of unwinding all three duplex DNA substrates and displayed a slight preference for the 3Ј-ssDNA tailed substrate (Fig. 6A). A titration of Bst-MutL protein was performed in the presence of a low helicase to substrate ratio (r ϭ 4) during the unwinding assay.
The results indicate that Bst-MutL had no effect on the unwinding activity of Bst-UvrD regardless of the type of DNA duplex tested (Fig. 6B), similar to the results obtained with the Tte-UvrD helicase and the corresponding MutL protein.
Thermophilic Helicase-dependent Amplification-To determine whether performing HDA at higher temperature would increase the specificity and efficiency of the reaction, we tested thermostable DNA helicases in HDA reaction in conjunction with various thermostable DNA polymerases. Among these thermostable helicases, Tte-UvrD helicase along with BstDNA polymerase performed the best under our assay conditions. Studies of the tHDA reaction buffer conditions indicate that the assay is sensitive to the concentrations of magnesium and salt. Optimal reaction conditions were determined to be under low magnesium (2.5-5 mM) and salt (0 -50 mM) concentrations.
Low temperature mHDA reactions require the participation of four proteins: polymerase, UvrD helicase, MutL, and T4 gp32 SSB. The components required for tHDA reactions were determined by systematically observing the ability of the reaction to proceed in the absence of each reagent (Fig. 7). In the absence of DNA template (lane 2), primers (Fig. 7, lanes 3 and  4), or cofactor dATP (lane 5), no amplification was observed. Substitution of the dATP cofactor with ATP decreased the amplification yield (lane 6). Additional studies were carried out to test which nucleotide cofactor maximally supports the tHDA reaction, and the result confirmed that dATP is better than 2 L. An and H. Kong, unpublished observation. ATP (data not shown). In terms of necessary proteins, the absence of the Tte-UvrD helicase from the reaction resulted in no amplification and confirmed that amplification is helicasedependent. Omitting both the thermostable MutL (lane 8) and SSB (lane 9) proteins had no significant effect on the DNA amplification and indicated that no accessory proteins are required for tHDA. As expected, no amplification was observed in the absence of BstDNA polymerase large fragment (lane 10).
To evaluate the sensitivity of tHDA, tHDA reactions were conducted with serial dilutions of the N. gonorrhoeae template DNA. Amplification was performed using a pair of primers specific for the piv Ng gene of N. gonorrhoeae, a gene that is necessary for virulence (see "Materials and Methods" and Ref. 22). A specific DNA fragment corresponding to the 94-bp target sequence was observed with as little as 50 copies of input genome (Fig. 8). In the absence of N. gonorrhoeae DNA, only low molecular weight, nonspecific product was observed that corresponded to the predicted size of primer-dimers (Fig. 8). DISCUSSION We have cloned and characterized a thermostable UvrD-like helicase from T. tengcongensis. Tte-UvrD helicase is able to unwind DNA duplexes possessing a 3Ј-or 5Ј-ssDNA tails as well as blunt-ended substrates. Although Tte-UvrD prefers 3Ј-ssDNA tailed duplex templates, the degree of the preference is much lower than that displayed by the E. coli UvrD (this study and Refs. 4 and 5). Recently, a study based on single turnover DNA unwinding experiments suggests that the active form of E. coli UvrD is a dimer that is formed on 3Ј-ssDNA tails possessing a minimum tail-length of 12 nucleotides (23). At high temperatures, the ends of the duplex DNA may become single-stranded because of "thermal breathing" (24,25). Since the temperature optima for Tte-UvrD is much higher than that for the E. coli UvrD, the thermal breathing effect is predicted to generate an increase intransient 3Ј-ssDNA tails. The ability of Tte-UvrD to efficiently unwind both blunt-ended and 5Ј-ssDNA tailed duplexes may be attributed to the transient generation of 3Ј-ssDNA tail during thermal breathing at higher temperatures and the subsequent capture of the tail by the helicase.
Previous work in E. coli has demonstrated that the MutL protein interacts with UvrD (8). The mechanism underlying this interaction has been shown to involve the stimulation of the UvrD unwinding activity by MutL, which is responsible for loading the UvrD helicase onto the DNA substrate (10). There is a biological relevance to the in vivo interaction between MutL and UvrD as UvrD participates in the DNA mismatch repair pathway by unwinding the strand containing the mutation (26). In addition, this effect is specific for UvrD and does not occur between the Rep helicase, which shares 40% homology with UvrD, and MutL (9).
Although sequence homologs of UvrD and MutL have been found in most of the sequenced bacterium genomes, very few biochemical and genetic studies have been reported. For example, it is not known whether the functional interaction between UvrD and MutL is universal to all bacterial systems. In this study, we have investigated whether the thermostable Tte-MutL can stimulate Tte-UvrD unwinding activity. Our results suggest that there is no significant stimulatory effect on the Tte-UvrD activity by Tte-MutL. To further verify our observations, we cloned, purified, and tested the thermostable helicase and the corresponding MutL protein from a partially sequenced B. stearothermophilus strain (GenBank TM accession number: NC_002926). We found that Bst-MutL also has no significant stimulation on Bst-UvrD activity. 2 Stimulation of UvrD activity by MutL appears to be either a specific effect observed in E. coli, or perhaps a more general mechanism necessary for efficient mesophilic DNA repair. If MutL and UvrD interact in thermophilic bacteria, the interaction may not automatically lead to the stimulation of the UvrD unwinding activity, at least in the two thermophilic bacteria reported in this study. Alternatively, UvrD may not be a necessary component of the DNA mismatch repair pathway in thermophilic bacteria and an alternative mechanism for DNA mismatch repair may exist.
In an effort to generate a tHDA platform, we evaluated the ability of the Tte-UvrD helicase and Tte-MutL accessory protein to amplify DNA in conjunction with a thermophilic polymerase. We found that Tte-UvrD was capable of efficiently amplifying target sequences from various genomes including both bacterial and human. Performing the HDA reaction at a higher temperature improves both the sensitivity and specificity of the reaction. As few as 10 copies of bacterial genomic DNA can be utilized for amplification. This is a significant advancement over the previously developed mHDA platform, which has a detection limit of 1000 copies of bacterial genomic DNA (1). Unlike the mHDA system, the tHDA system does not require MutL and SSB proteins as accessory proteins and, thus, simplifies the reagent composition. In the tHDA assay, addition of the Tte-MutL protein to the reaction does not enhance product formation (Fig. 7). This is in contrast with the previously developed mHDA platform (1), which has been shown to absolutely require the presence of the corresponding MutL protein for amplification. However, the lack of enhancement observed in the tHDA assay by Tte-MutL is in agreement with the biochemical analysis of the Tte-UvrD helicase, which shows that addition of MutL to the unwinding assay did not significantly enhance unwinding activity (Fig. 5). Currently, the exact mechanism underlying the lack of an SSB requirement is not known. Perhaps at higher temperatures (65°C), the rate of rewinding of separated DNA strands is slower than that at lower temperatures (37°), eliminating the need for an SSB to stabilize the single-stranded DNA.