Functional Characterization of tlmK Unveiling Unstable Carbinolamide Intermediates in the Tallysomycin Biosynthetic Pathway*

Tallysomycins (TLMs) belong to the bleomycin family of anticancer antibiotics. TLMs differ from bleomycins primarily by the presence of a 4-amino-4,6-dideoxy-l-talose sugar attached to C-41 as part of a glycosylcarbinolamide. We previously proposed, on the basis of bioinformatics analysis of the tlm biosynthetic gene cluster from Streptoalloteichus hindustanus E465-94 ATCC 31158, that the tlmK gene is responsible for the attachment of this sugar moiety. We now report that inactivation of tlmK in S. hindustanus abolished TLM A and TLM B production, the resultant ΔtlmK mutant instead accumulated five new metabolites, and introduction of a functional copy of tlmK to the ΔtlmK mutant restored TLM A and TLM B production. Two major metabolites, TLM K-1 and TLM K-2, together with three minor metabolites, TLM K-3, TLM K-4, and TLM K-5, were isolated from the ΔtlmK mutant, and their structures were elucidated. These findings provide experimental evidence supporting the previous functional assignment of tlmK to encode a glycosyltransferase and unveil two carbinolamide pseudoaglycones as key intermediates in the TLM biosynthetic pathway. TlmK stabilizes the carbinolamide intermediates by glycosylating their hemiaminal hydroxyl groups, thereby protecting them from hydrolysis during TLM biosynthesis. In the absence of TlmK, the carbinolamide intermediates fragment to produce an amide TLM K-1 and aldehyde intermediates, which undergo further oxidative fragmentation to afford carboxylic acids TLM K-2, TLM K-3, TLM K-4, and TLM K-5.

Tallysomycins (TLMs) 3 belong to the bleomycin (BLM) family of glycopeptide antitumor antibiotics (1, 2) (Fig. 1). The BLMs are currently used clinically under the trade name Blenoxane in combination with a number of other agents for the treatment of Hodgkin lymphoma, carcinomas of the skin, head, and neck, and testicular cancers. Early development of drug resistance and dose-dependent pulmonary toxicity are major limitations of BLMs in chemotherapy (3,4). Structural modifications to this family of natural products are necessary for improvement in efficacy and reduction of toxicity. Although numerous BLM analogs have been synthesized (5,6), total synthesis remains of limited practical value because of the complex scaffold of this entire family of natural products. Recent cloning and characterization of the BLM, TLM, and zorbamycin biosynthetic gene clusters from Streptomyces verticillus ATCC15003 (7), Streptoalloteichus hindustanus E465-94 (ATCC 31158) (8), and Streptomyces flavoviridis ATCC21892 (9) opened the possibility toward the production of novel BLM analogs via genetic metabolic engineering approaches.
TLMs are structurally related to BLMs but differ from BLMs in three ways; (i) the presence of two hydroxyl groups within the aminoethylbithiazole moiety, one of which is conjugated to a 4-amino-4,6-dideoxy-L-talose sugar as part of a glycosylcarbinolamide, (ii) the presence of two series of C-terminal amine moieties with (A series) or without (B series) a ␤-lysine moiety in the subterminal position, and (iii) the absence of a methyl group in the valerate moiety (Fig. 1). One of the B-series TLM analogs, TLM S10b, which has a 1,4-diaminobutane as the C-terminal amine moiety, exhibited antitumor activity similar to that of the BLMs in preclinical studies but failed to yield the desired response in phase II clinical trials due to poor cell penetration (10,11). The results of preclinical and clinical studies indicate that the sugar moieties in the BLM family compounds take part in cellular recognition and drug uptake. Because one of the main differences between the BLMs and TLMs is the presence of a third sugar moiety in the TLMs, we sought to generate the des-talose TLMs to determine whether the talose moiety is responsible for the poor cell penetration of TLM S10b.
It is apparent upon comparing and contrasting the genes identified within the tlm and blm clusters that both clusters contain the genes proposed to be responsible for the synthesis and attachment of the L-gulose-3-O-carbamoyl-D-mannose disaccharide. At the downstream part of the tlm gene cluster, however, there is a tlmHJK operon, the homolog of which is absent in the blm cluster. This small operon has been proposed to be involved in the biosynthesis of the 4-amino-4,6-dideoxy-L-talose and its attachment to the TLM nonribosomal peptide skeleton. TlmK, which shows low sequence homology to known glycosyltransferases, was proposed to catalyze the attachment of the talose sugar to the aminoethylbithiazole moi-ety (8). However, the sequence of attachments of the sugar moieties, the L-gulose-3-O-carbamoyl-D-mannose disaccharide and the 4-amino-4,6-dideoxy-L-talose, could not be predicted by bioinformatics analysis alone.
The aims of the present study were (i) to provide genetic proof for the role of tlmK in TLM biosynthesis, (ii) to determine the sequence of the sugar attachments, and (iii) to engineer TLM analogs that specifically lack the talose moiety. Here we report that inactivation of tlmK in S. hindustanus abolished TLM A and TLM B production, the resultant ⌬tlmK mutant instead accumulated five new metabolites, and introduction of a functional copy of tlmK to the ⌬tlmK mutant restored TLM A and TLM B production. Isolation and structural characteriza-tion of the five metabolites support the previous functional assignment of tlmK to encode a glycosyltransferase, unveil two carbinolamide pseudoaglycones as key intermediates in the TLM biosynthetic pathway, and suggest the TlmK-catalyzed glycosylation most likely occurred after the attachment of the disaccharide moiety to the TLM aglycone.

EXPERIMENTAL PROCEDURES
Bacterial Strains, Plasmids, and Culture Conditions-S. hindustanus E465-94 ATCC31158 (American Type Culture Collection, Manassas, VA) and derived recombinant strains were routinely cultivated at 30°C on ISP4 agar medium supplemented with MgCl 2 to final concentration of 28 mM or TSB liquid medium. Escherichia coli DH5␣ and ET12567 (12) were grown in liquid or on solid Luria-Bertani medium at 37°C (13). E. coli BW25113/pIJ790 and BT340 were cultivated according to the RED-mediated PCRtargeting mutagenesis kit (14). Electroporation using S. hindustanus spores was carried out as previously described (8).
pIJ780 from the RED-mediated PCR-targeting mutagenesis kit (14) was modified by replacing the viomycin resistance gene (vph) with the kanamycin-neomycin resistance gene (neo) from Supercos1 (Stratagene, La Jolla, CA) to yield pBS8010. pBS8010 was then used as template to amplify the FRT-neo cassette for replacing tlmK in pBS8008 (8) following the REDmediated PCR-targeting mutagenesis protocol. Cosmid pBS8008 carrying 41.6-kilobase S. hindustanus genomic DNA encoding part of the tlm biosynthetic gene cluster was used to construct the gene deletion mutant allele in E. coli by the RED-mediated PCR-targeting mutagenesis method. The aac(3)IV-tsr apramycin and thiostrepton resistance gene cassette in its vector backbone was used for selection in both E. coli and S. hindustanus. pBS8004 (8) carrying the ⌽C31 integration function region and the thiostrepton resistance marker tsr were used to construct the tlmK expression plasmid (supplemental Tables S1 and S2).
Construction of the ⌬tlmK In-frame Deletion Mutant Strain SB8003-The ⌬tlmK in-frame deletion mutant was constructed via a homologous recombination strategy. First, a tlmK allele in pBS1011 was constructed in E. coli by the RED-me- diated PCR-targeting mutagenesis strategy from pBS8008 using oligonucleotides tlmK-frt1 and tlmK-frt2 (supplemental Table S3). This replaced the tlmK gene in pBS8008 with the FRT-neo cassette amplified from pBS8010 to afford pBS8011. Next, the FRT-neo cassette of pBS8011 was removed by the FLP recombination function provided by E. coli BT340 according to the instructions of the RED-mediated PCR-targeting mutagenesis kit (14). In the resulting cosmid pBS8012, the entire tlmK open reading frame was deleted, leaving only the ATG start codon, the TGA stop codon, and an 81-bp stretch of unrelated nucleotides between the ATG and TGA codons. Finally, pBS8012 was passed through E. coli ET12567 to produce demethylated plasmid DNA and subsequently transferred into S. hindustanus wild-type strain by electroporation. Thiostrepton-resistant transformants were selected and underwent one round of nonselective sporulating growth; resulting spores were plated out and screened for thiostrepton-sensitive colonies.
The genotype of these thiostrepton-sensitive isolates was determined by PCR using primers tlmK-up and tlmK-down (supplemental Table S3), resulting in identification of five ⌬tlmk in-frame deletion mutant isolates named SB8003. The genotype of SB8003 was further confirmed by Southern hybridization using the 2238-bp fragment amplified by PCR with primers tlmK-up and tlmK-down (supplemental Table S3) from the S. hindustanus wild-type genomic DNA as a probe. DNA isolations and manipulations were carried out according to standard protocols (13,15). Southern hybridization using digoxigenin-labeled DNA probes was performed according to manufacturer provided protocols (Roche Diagnostics).
Genetic Complementation of the ⌬tlmK In-frame Deletion Mutant Strain SB8003-The ErmE* promoter was amplified from pWHM79 by PCR using primers PermEI-f and PermEI-r (supplemental Table S3) and cloned as an EcoRI-BamHI fragment into the same sites of pBS8004 to yield the integrative vector pBS8013. The tlmK gene was amplified from pBS8008 using primers tlmK-NsiI and tlmK-XbaI (Table S3) and cloned as an NsiI-XbaI fragment into the same sites of pBS8013 to afford pBS8014. pBS8014 was introduced into SB8003 by electroporation, and selection with thiostrepton resistance afforded the ⌬tlmK-complemented recombinant strain SB8004.
For preparative-scale isolation of the TLM K-1, K-2, K-3, K-4, and K-5 from the ⌬tlmK mutant SB8003 strain, the fermentation culture (10 liters) was centrifuged at 3000 rpm for 30 min, and the supernatant was collected, adjusted to pH 7. Final purification of each metabolite was achieved by semipreparative HPLC on an Altima C18 column (5 m, 250 ϫ 10 mm, Alltech Associates, Inc.). HPLC was carried out under the following conditions. Instrument and detector were the same as stated above. The column was equilibrated with 100% solvent A (0.1% formic acid) and 0% solvent B (methanol) and developed with a linear gradient (0 -15 min, from 95% A/5% B to 50% A/50% B; 15 to 18 min, from 50% A/50% B to 0% A/100% B) at a flow rate of 3 ml/min and with UV detection at 300 nm. TLM K-1, K-2, K-3, and K-5 were eluted with retention times of 5.0, 7.5, 7.7, and 8.5 min, respectively. Upon final removal of MeOH by concentration in vacuo, the residues were lyophilized to afford the final pure metabolites TLM K-1 (as copper complex, 4.1 mg), TLM K-2 (1.4 mg), TLM K-3 (0.5 mg), and TLM K-5 (0.3 mg), respectively. Final treatment of the TLM K-1 copper complex with 0.5 M EDTA-Na (pH 7.3) solution followed by a HPLC purification step afforded copper-free TLM K-1 (3.2 mg) (8,9).
Each of the purified metabolites was subjected to MS, onedimensional and two-dimensional 1 H or 13 C NMR spectroscopic analyses, or a combination of thereof for structural determination. LC-MS analysis was carried out on an Agilent 1100 HPLC-MSD SL quadrupole mass spectrometer (Santa Clara, CA), and high resolution matrix-assisted laser desorption ionization (MALDI)-Fourier transform MS analysis was carried out on an IonSpec HiResMALDI Fourier transform mass spectrometer with a 7-tesla superconducting magnet (Lake Forest, CA). 1 H and 13 C NMR spectra were obtained on a Varian Unity Inova 500 instrument at 500 MHz for 1 H and 125 MHz for 13 C nuclei, and two-dimensional NMR spectra were performed using standard Varian pulse sequences (Palo Alto, CA).

Characterization of tlmK by Gene Inactivation and Mutant
Complementation-To investigate its role in TLM biosynthesis, an in-frame deletion of the tlmK gene was generated in the TLM producing S. hindustanus wild-type strain by homologous recombination ( Fig. 2A). pBS8012, carrying a ⌬tlmK inframe deletion mutant allele, was made from pBS8008, a cosmid carrying 41.6 kilobases of downstream part of the tlm gene cluster. pBS8012 was then transformed into S. hindustanus wild-type strain by electroporation followed by screening for double crossover homologous recombination events, yielding five isolates of the mutant strain SB8003; the ⌬tlmK in-frame deletion genotype in SB8003 was confirmed by Southern hybridization (Fig. 2B). Fermentations of SB8003 showed that (i) TLM A and B production has been abolished and, (ii) instead, five new metabolites were found with retention times of 10.4 (TLM K-1), 15.2 (TLM K-2), 15.8 (TLM K-3), 16.3 (TLM K-4), and 16.9 (TLM K-5) min, which were apparently different from those of TLM A and B (Fig. 2C).
To genetically complement the ⌬tlmK mutation in SB8003, pBS8014, an integrative plasmid carrying a functional copy of tlmK, whose expression is under control of the constitutive ErmE* promoter (16), was conjugated into SB8003 to yield the complementation strain SB8004 (i.e. SB8003 (pBS8014)). The production of TLM A and B was partially restored in SB8004 with TLM A and B titers of 8 -10 mg/liter, which is ϳ50% that for the S. hindustanus wild-type strain (Fig. 2C).
Isolation and Structural Characterization of the New Metabolites Accumulated in the ⌬tlmK Mutant Strain SB8003-Deletion of tlmK, thereby inactivating the TlmK glycosyltransferase in TLM biosynthesis, might lead to the production of a carbinolamide intermediate lacking the talose moiety at C-41 (Fig. 1). Such intermediates may readily undergo fragmentation to afford an amide and aldehyde (see Fig. 4 To establish the structures, these metabolites were isolated from large scale fermentation (10 liter). TLM K-1 was isolated as a blue powder, which is characteristic for members of the BLM and TLM family as a copper complex. To remove copper for NMR analysis, the complex was treated with EDTA to afford copper-free TLM K-1 as a pale white powder. The high resolution MALDI-Fourier transform mass spectrometry analysis of copper-free TLM K-1 yielded  dihydroxyethyl)-2,4Ј-bithiazole-4-carboxylic acid, terminal amines (for both A-and B-series of TLMs), and the 4-amino-4,6-dideoxy-L-talose moiety (17,18) (Figs. 1 and 4). The structure of TLM K-1 was finally unambiguously determined by careful analysis of 1 H, 13 C, and two-dimensional NMR measurements as the degraded product, containing the "left" structure units mentioned above, of the proposed carbinolamide intermediates in the TLM biosynthetic pathway (Fig. 3 and Table 1).
TLM K-2, K-3, and K-5 were all purified as pale white powders. Although upon ESI-MS analysis TLM K-2 showed a [MϩH] ϩ ion at m/z 542.2, high resolution MALDI Fourier transform MS analysis of TLM K-2 afforded a decarboxylation fragment [M-COOHϩH] ϩ ion at m/z 498.2355, which agrees well with the molecular formula of C 21 H 36 N 7 O 3 S 2 ϩ H ϩ (calculated 498.2394). The 1 H and 13 C NMR data of TLM K-2 are almost identical to those of the "right" portion of TLM A (17, 18) (Fig. 3 and Table 2). However, an oxygen-bearing methine signal (␦ C 83.3) for C-41 observed in the 13 C NMR spectrum of TLM A was absent in that of TLM K-2, and instead, a new carbonyl signal at ␦ C 178.0 was observed. Combined with the decarboxylation fragment detected in the MALDI-MS spectrum of TLM K-2, this carbonyl moiety was considered as a part of a newly formed carboxylic acid group. The correlation between H-42 (␦ H 5.38 s) and the carbonyl carbon indicated that this carboxylic acid group is located at C-41 (Fig. 3). On the basis of these data the complete structure of TLM K-2 was established. The structure of TLM K-2 indicates that the nascent aldehyde species (right portion), generated upon hydrolysis of the proposed carbinolamide intermediate, is further oxidized spontaneously to form the corresponding carboxylic acid TLM K-2 (Fig. 4).
ESI-MS analysis of TLM K-3 yielded [MϩH] ϩ ion at m/z 512.3, which was 30 units less (CH 2 O) than that of TLM K-2. The 1 H NMR data of TLM K-3 are almost identical to those of TLM K-2 except for the absence of the oxygenated methine signal at ␦ H 5.38 (H-42) ( Table 2). The structure of TLM K-3 was then established to be a further degradation product of TLM K-2 resulting from the loss of C-41 via decarboxylation and subsequent C-42 oxidation to finally form a new carboxylic acid (Fig. 4).
LC-ESI-MS analyses of TLM K-4 and TLM K-5 afforded [MϩH] ϩ ions at m/z 414.2 and 384.2, both 128 units (equal to a ␤-lysine moiety) smaller than that of TLM K-2 and K-3, respectively. TLM K-4 and K-5 were, thus, considered to be breakdown products of the right portion of the carbinolamide intermediate for TLM B. An attempt to purify TLM K-4 was not successful due to its rapid conversion into TLM K-5, and the structure of TLM K-4 was, therefore, assigned on the basis of MS data and its specific conversion to TLM K-5, which was further characterized by 1 H NMR. Thus, the 1 H NMR spectrum of TLM K-5 revealed two olefin signals in the low field and seven methylene signals in the high field ( Table 2). The two olefin singlets, ␦ H 8.21 and ␦ H 8.30, were assigned as H-44 and H-47 by comparing with those of TLM K-2 and K-3. The seven

DISCUSSION
The BLMs and TLMs are a family of structurally related glycopeptide-derived antibiotics with significant anti-tumor activity. The BLMs are the only members of this family that are currently used clinically in combination chemotherapy for the treatment of several types of tumors. The total chemical synthesis is of limited practical value for developing new analogs given the structural complexity of the BLM family of natural products. In contrast, a series of BLM and TLM derivatives, which differ in their terminal amines, have been produced by precursor amine feeding fermentations (19,20). Peplomycin, which is a BLM-type compound produced by feeding with N-(3-aminopropyl)-␣-phenylethylamine, showed lower pulmonary toxicity than the clinically used Blenoxane and has been successfully developed as the second generation of BLMs in Japan (21). These early studies clearly demonstrated that minor structural modification in BLM-type compounds could result in significant therapeutic gains. Inspired by these findings, we sought to generate new analogs of the BLM family using combinatorial biosynthesis strategies. During our ongoing research on hybrid peptide-polyketide natural product biosynthesis, we have cloned and sequenced the gene clusters for BLM from S. verticillus ATCC15003 (7), TLM from S. hindustanus E465-94 ATCC31158 (8), and zorbamycin from S. flavoviridis ATCC21892 (9). This enabled us to find the differences in BLM, TLM, and zorbamycin biosynthesis and to formulate hypothesis for generating new BLM analogs by genetic manipulation of the BLM, TLM, and zorbamycin biosynthetic machineries.
Functional characterization of tlmK by gene inactivation followed by structural characterization of the accumulated metabolites unveiled unstable carbinolamide pseudoaglycones as key intermediates, shedding new insights into TLM biosynthesis. The tlmK gene, residing within the tlmHJK operon that is located near the downstream end of the tlm biosynthetic gene cluster, encodes a 520-amino acid protein (8). The C-terminal portion of TlmK exhibits low similarity (27% identity and 42% similarity) to the dihydrostreptosyl glycosyltransferase (StrH) from the streptomycin gene cluster of Streptomyces griseus (22). Unlike many other genes in the TLM cluster, tlmK has no counterpart in the blm biosynthetic gene cluster. Given the fact that BLMs lack the 4-amino-4,6-dideoxy-L-talose moiety, tlmK has been proposed to be involved in the attachment of this extra sugar moiety to the TLM aglycone (8).
Because of the unique structure of the carbinolamide where the talose sugar is attached to the TLMs, the des-talose TLMs (i.e. the carbinolamide pseudoaglycones) generated upon inactivation of tlmK might not be stable. Indeed, extensive analysis of fermentation culture of the ⌬tlmK mutant strain SB8003 failed to detect the intact carbinolamide intermediates predicted for TLM biosynthesis. Instead, we found five new metabolites, TLM K-1, K-2, K-3, K-4, and K-5, from SB8003 and their structures established by MS and NMR analyses. These metabolites can be best interpreted as degradation products of the predicted carbinolamide intermediates (Fig. 4). Thus, the C-41 of carbinolamides first hydrolytically fragments to afford the amide TLM K-1 and aldehydes. The aldehyde species then undergo oxidation to carboxylic acids TLM K-2 and K-4, which are finally decarboxylated and oxidized at C-42 to form TLM K-3 and K-5, respectively. Although we were unable to detect the des-talose TLM directly, accumulation of these metabolites in SB8003 and their subsequent isolation and structural elucidation indirectly but unambiguously establish the function of TlmK as the glycosyltransferase responsible for the attachment of the talose sugar to the pseudoaglycone as the final step of the TLM biosynthetic pathway. In addition, isolation and characterization of TLM K-1 as the left portion of TLM containing the L-gulose-3-O-carbamoyl-D-mannose disaccharide moiety suggests that the attachment of this disaccharide moiety most likely occurs before the dihydroxylation and subsequent glycosylation at the aminoethylbithiazole moiety ( Fig. 4) (7)(8)(9).
DNA cleavage activities of the breakdown products provide new insights into the structural and activity relationship for the BLM family of antitumor antibiotics. The clinic effect of BLM family antibiotics is thought to be derived from their ability to mediate single-and double-strand DNA cleavage at the 5Ј-GT or GC dinucleotide sites through an activated Fe(II)-complex form of BLM (3). Each structural unit of BLMs has been proved to contribute importantly to its biological activity through the extensive studies over the past 40 years (4, 5) (Fig. 1). The pyrimidoblamic acid and the linked ␤-hydroxyhistidine, defined as the metal binding domain, is involved in oxygen activation and radical generation, which are responsible for the final DNA cleavage. The role of the carbohydrate domain is known to enhance cleavage efficacy. Recent crystal structure of the DNA-Co-BLM complex suggested that the disaccharide serves as a space-filling unit and also by intermolecular hydrogen bonding interaction to enhance the binding of BLMs and DNA, thereby allowing the metal binding domain to adopt an optimized position to the target cleavage site (35). The C-terminal bithiazole moiety and positively charged amine tail serve as the DNA binding domain through an intercalation at the DNA recognition site. The linker region including the threonine and valerate moieties stabilizes the DNA binding with the BLMs through hydrogen-bonding between the hydroxyl group of the valerate moiety and the sugar phosphate backbone (3,35).
To address the function of the metal chelating structural unit, the full metal binding domain of BLMs, including the pyrimidoblamic acid, ␤-hydroxyhistidine, and the disaccharide moiety, has been synthesized and was found to cleave super- coiled ⌽X174 DNA in the presence of O 2 (Fe(II)) at 2-4-fold more effective than the background level (i.e. Fe(II) and O 2 alone) but 30 -40-fold less effective than BLM A2 (36). In a more sensitive method using a 32 P 5Ј-end-labeled double-stand DNA w794 and its complement w836, the H 2 O 2 -Fe(III) complex of this compound was demonstrated to be 5-6-fold more effective than H 2 O 2 -Fe(III) alone but 200 -300-fold less effective than BLM A2 (36). The metal binding domain lacking the disaccharide moiety failed to have any DNA cleavage activity above the background level (36). Bleomycinic acid, which only lacks of the terminal amine moiety compared with BLM A2, was only 35% effective on total DNA cleavage compared to that mediated by BLM A2 (37). The "extended" metal chelating unit, which includes the linker region, has not been synthesized yet and, thus, leaves us the question about the DNA cleavage activity of this key partial structure. The bithiazole DNA binding domain was also synthesized, and no DNA cleavage activity was found, although the chlorinated bithiazoles were found to effect potent light-mediated DNA cleavage via chlorine radicals (38).
In this study we generated the "left" and "right", two parts of the BLMs molecule by metabolic pathway engineering and product selfdegradation. The left part, i.e. TLM K-1, includes the whole metal chelating domain, disaccharide, and the linker region, and the right part, i.e. TLM K-2, K-3, K-4, and K-5, consists of the bithiazole moiety and the terminal amines (Figs. 1 and 4). As we expected, the whole molecule of TLM A showed significant DNA cleavage activity in presence of Fe(II) and oxygen (Fig. 6). In contrast, TLM K-1 only showed limited activity right above the background cleavage, and TLM K-2 showed no activity even in high concentrations. The DNA cleavage velocity of TLM K-1 dropped by about 140 times compared with TLM A under the conditions examined. These results suggested that the metal binding domain of BLMs chelates a metal ion for oxygen activation and radical generation, which is required for DNA cleavage. But this domain, alone or combined with the linker domain, can only cleave DNA with minimal activity above the background level. The bithiazole and terminal amine part provides DNA recognition and intercalation moiety to facilitate DNA cleavage. Without the coordination of the whole molecule, each structure unit alone could not generate efficient bioactivity in DNA cleavage.
Supporting online information online includes experimental procedures for the detection of DNA cleavage activity of TLM A, K-1, and K-2 by break-light assay (39) and Tables S1 for  plasmids, Tables S2 for bacterial strains, and Table S3 for oligonucleotides as PCR primers used in this study.