Solution NMR Structures of Pyrenophora tritici-repentis ToxB and Its Inactive Homolog Reveal Potential Determinants of Toxin Activity*

Background: ToxB is a proteinaceous toxin but its homolog toxb has no toxic activity. Results: Both adopt a β-sandwich fold stabilized by two disulfide bonds but differ in the dynamics of one sandwich half. Conclusion: Toxicity is correlated with decreased compactness, increased flexibility, and polymorphism in an active site loop. Significance: ToxB activity depends on interplay between internal dynamics and interactions with putative targets. Pyrenophora tritici-repentis Ptr ToxB (ToxB) is a proteinaceous host-selective toxin produced by Pyrenophora tritici-repentis (P. tritici-repentis), a plant pathogenic fungus that causes the disease tan spot of wheat. One feature that distinguishes ToxB from other host-selective toxins is that it has naturally occurring homologs in non-pathogenic P. tritici-repentis isolates that lack toxic activity. There are no high-resolution structures for any of the ToxB homologs, or for any protein with >30% sequence identity, and therefore what underlies activity remains an open question. Here, we present the NMR structures of ToxB and its inactive homolog Ptr toxb. Both proteins adopt a β-sandwich fold comprising three strands in each half that are bridged together by two disulfide bonds. The inactive toxb, however, shows higher flexibility localized to the sequence-divergent β-sandwich half. The absence of toxic activity is attributed to a more open structure in the vicinity of one disulfide bond, higher flexibility, and residue differences in an exposed loop that likely impacts interaction with putative targets. We propose that activity is regulated by perturbations in a putative active site loop and changes in dynamics distant from the site of activity. Interestingly, the new structures identify AvrPiz-t, a secreted avirulence protein produced by the rice blast fungus, as a structural homolog to ToxB. This homology suggests that fungal proteins involved in either disease susceptibility such as ToxB or resistance such as AvrPiz-t may have a common evolutionary origin.

Pyrenophora tritici-repentis, the causal agent of tan spot of wheat (Triticum aestivum), is a plant pathogenic fungus that produces host-selective toxins that induce cell death and disease susceptibility only in hosts that have a toxin sensitivity gene/locus (1)(2)(3)(4)(5). To date, three host-selective toxins have been defined from P. tritici-repentis, the necrosis-causing Ptr ToxA (ToxA), and the chlorosis-causing Ptr ToxB (ToxB) and Ptr ToxC (ToxC). ToxA and ToxB are proteinaceous toxins, and the genes encoding them have been cloned and characterized (6 -9). Functional studies of ToxA indicate that it localizes to the cytoplasmic compartments and to chloroplasts where it exerts a toxic effect (10). Structural and mutagenic analyses reveal a single-domain protein composed of a ␤-sandwich fold that contains an Arg-Gly-Asp motif on a solvent exposed loop, which is important for toxin uptake and biological activity (11)(12)(13)(14).
Although progress has been made in understanding the role of ToxA in the development of tan spot, thus far no putative functional site for ToxB has been identified, and its impact on disease development is less well understood. This is in part because its amino acid sequence is less than 30% identical to any protein with known structure, and thus does not reveal any identifiable motif(s). ToxB is synthesized as an 87-amino acid preprotein that upon cleavage of its secretory signal peptide results in a 64-amino acid mature protein. It appears to have a complex evolutionary history as suggested by the presence of homologs in non-pathogenic P. tritici-repentis isolates and several pathogenic ascomycetes (15). For example, some homologs found in isolates of Pyrenophora bromi (Pb ToxB) are not toxic to the P. bromi host, bromegrass, but are toxic to ToxB-sensitive wheat cultivars, whereas other homologs such as a naturally occurring variant of ToxB, Ptr toxb (toxb), found in some non-pathogenic P. tritici-repentis isolates have no toxic activity (16,17).
Assessment of the biological activity of ToxB/toxb chimeric and site-directed mutant proteins has demonstrated complexity in the ToxB structure-function relationship (16). Chimeric proteins that contain combinations of three broadly defined regions (N-terminal, central, and C-terminal) (see Fig. 1A) identify the N-terminal region of ToxB as crucial for toxin activity and also show the importance of both the central and C-terminal regions for full activity (16). Within the N-terminal regions of ToxB and toxb, there are only two amino acid differences: a Val-to-Thr at position 3, and an Ala-to-Val at position 12. ToxB mutants with either a V3T or A12V substitution also show reduced toxin activity (Fig. 1B).
In an attempt to understand the residue specific contributions to activity, we report here the three-dimensional NMR structures of ToxB and toxb proteins and analyze the structural features required for toxin activity. The global solution structures are virtually identical. However, toxb displays increased flexibility and an expanded structure, which together with an increased propensity of toxb to disulfide bond reduction, and residue differences in a putative active site, suggest that absence of toxin activity is correlated with amino acid differences that increase the internal dynamics of the protein and abolish interactions with putative targets.

EXPERIMENTAL PROCEDURES
Sample Preparation-ToxB and toxb proteins were heterologously expressed in Pichia pastoris transformed with the vectors pCM11 and pCM10, respectively, and purified as described previously (16) with modifications in medium preparation. Briefly, P. pastoris strains were grown in buffered minimal glycerol and buffered minimal methanol medium supplemented with ( 15 NH 4 ) 2 SO 4 or 13 C-methanol and ( 15 NH 4 ) 2 SO 4 (Cambridge Isotope Labs, Inc., Andover, MA) to produce 15 N or 13 C/ 15 N isotope-labeled proteins. Protein concentrations were determined with the Pierce BCA Protein assay kit (Pierce, Rockford, IL). The biological activity of 15 N and 13 C/ 15 N isotope-labeled ToxB did not differ from unlabeled heterologously expressed ToxB, as determined in bioassays performed as described previously (16). SDS-PAGE was performed as described (16). For nonreducing gel conditions, loading dye was similar as that used for reducing conditions except that no reducing agent was added.
NMR Data Collection and Analysis-NMR measurements were recorded on 0.5-0.8 mM 13 C 15 N-or 15 N-labeled samples in 10 mM phosphate buffer, pH 6.0, and containing 10% D 2 O, a protease inhibitor mixture (Roche Applied Science) and 1 mM 2,2-dimethylsilapentene-5-sulfonic acid for proton referencing. Data were collected at 303 K, processed with NMRpipe (18), and visualized with Sparky (19). Conventional triple resonance experiments for 1 H, 13 C, and 15 N resonance assignments were collected on a Bruker 600 MHz DRX instrument. Two-dimensional 1 H-13 C HSQC, three-dimensional HBHA(CO)NH, three-dimen-sional HC(CO)NH, three-dimensional C(CO)NH, and threedimensional HCCH-TOCSY (Total Correlation Spectroscopy) were used for side chain assignments. NOE data were obtained from 13 C-and 15 N-edited NOESY experiments collected on a  Varian 800 MHz spectrometer for ToxB, and a Bruker 700 MHz spectrometer was used for toxb. Three-dimensional 13 C-and 15 N-edited NOESY spectra were acquired with a mixing time of 120 ms. Distance constraint data were analyzed with XEASY (20).
Steady-state 1 H-15 N NOEs were collected as two two-dimensional interleaved spectra with and without proton saturation delay of 3 s and a recycle delay of 1.5 s (21). NOE values were determined from the ratio of the peak intensities. Errors associated with the data were estimated from the root mean square variation of noise. T 2 experiments were recorded with relaxation delays of 15.4, 30.9, 61.8, 77.2, 92.6, 108.1, 123.5, and 138.9 ms. T 2 values were determined by fitting the measured peak heights versus time profiles to the relationship: I ϭ I o exp(Ϫt/T 2 ), where t is the relaxation delay, I is the intensity of the peak measured at time t, and I o is the initial intensity of the peak. Data were analyzed with the rate analysis interface of NMRview (22).
A series of 1 H- 15 N HSQC experiments were recorded on lyophilized samples of 15 N-labeled ToxB or toxb dissolved in D 2 O. Amide protons were considered to be involved in hydrogen bonding if they were still visible after the first round of HSQC experiments. For each hydrogen bond, two distance restraints were applied for H N (i)-O(j) and N(i)-O(j).
Structure Calculation-NMR structures of ToxB and toxb were calculated using NOESY data refined with identical protocols. Initial structures were calculated with CYANA (version 3.0) (23) using resonance assignments, NOESY peak lists, hydrogen bond restraints from hydrogen/deuterium exchange experiments, and dihedral angle restraints derived from TALOSϩ (24) using 1 H␣, 15 N, 13 C␣, 13 C␤, and 13 CЈ chemical shifts. The automated structures generated by CYANA were used along with the assigned peaks to further refine the structures. The root mean square deviations (r.m.s.d.) 6 were calculated with MOLMOL (25). The PSVS server (26) was used to check the quality of the structures.
The ensembles of structures were analyzed using in-house r.m.s.d.-based structure comparison algorithm. 7 For ease of comparison, Pro 49 insertion in toxb was not included in the analyses.

RESULTS
Disulfide Bond Stability-Sequence comparison of mature ToxB and toxb shows 78% identity (27), with conservation of 51 amino acids including four cysteines that form two disulfide bonds (Fig. 1A). In active ToxB, these disulfide bonds are highly resistant to reduction even in high concentrations of a reducing agent and temperatures of 100°C (16). To determine whether toxb is more prone to reduction than ToxB, we compared their reducing and non-reducing SDS-PAGE patterns (Fig. 1C). In both conditions, ToxB migrates as a single band in the oxidized form. In non-reducing conditions, the predominant band in toxb migrates similar to the oxidized form of ToxB; there are very faint bands at ϳ13 and 26 kDa, which may represent disulfide cross-linked dimers and tetramers. Multimeric forms of toxb were not detected in samples on which MALDI-TOF and gel filtration were performed (data not shown). Therefore, it appears that a very small population of toxb may have reduced cysteines that are prone to intermolecular disulfide bond formation leading to multimerization at high protein concentrations. Consistent with this interpretation, the disulfide bonds in toxb are more prone to reduction; under reducing conditions, only about half of toxb is present in the oxidized form and half in an ϳ14-kDa slower migrating band that we assign to reduced toxb. A disulfide crosslinked dimer would not exist under reducing conditions and the increased proportion of the ϳ14-kDa band in the reduced toxb sample relative to the similar migrating band present under nonreducing conditions supports the conclusion that the slower band is the reduced form of toxb.
Reducing SDS-PAGE for all chimeras show that only those that include the N-terminal region of toxb have a second slower migrating band (Fig. 1B), indicating that one or both of the two amino acid differences in the N-terminal is responsible for the increased ease in reduction. Interestingly, the slower migrating band is only present in reducing SDS-PAGE of the V3T substituted ToxB mutant protein and not in the A12V, even though both mutations lead to reduced activity. This suggests that an altered protein conformation in the vicinity of residue 3 may increase disulfide bond accessibility allowing for reduction of a population of molecules and thus the slower migrating band.

Solution Structures of Active and Inactive ToxB Homologs-
Both ToxB and toxb show well resolved spectra consistent with an ordered structure ( Fig. 2A). Differences in chemical shifts for the same amino acids in the sequence suggest small differences in their local environment. Interestingly, their global structures are virtually indistinguishable. ToxB adopts a ␤-sandwich fold consisting of six anti-parallel ␤-strands corresponding to residues 2-8 (␤1), 14 -19 (␤2), 22-28 (␤3), 34 -40 (␤4), 43-46 (␤5), and 57-62 (␤6) (Fig.  2C). Strands ␤1, ␤2, and ␤6 form one-half of the sandwich, and ␤3, ␤4, and ␤5 form the other. A disulfide bond between Cys 2 in ␤1 and Cys 43 in ␤5 bridges the halves; a second disulfide is formed between Cys 18 in ␤2 and Cys 64 at the C terminus. The propensity to form disulfide bridges was initially inferred from the C␤ chemical shifts of the cysteines, which were higher than the 29 -32 ppm range expected for C␤ chemical shifts of reduced cysteines (28). Specific disulfide bonding patterns were unambiguously assigned from weak NOE interactions between the side chain ␤ protons of Cys 2 and Cys 43 , and Cys 18 and Cys 64 (Cys 65 in toxb). Inactive toxb has nearly identical structure (Fig. 2D), except for a slightly longer ␤5 (43-47) and shorter ␤6 (58 -61). Subtle differences between the structures were identified by analysis of the ensemble structures as discussed below.
The ensembles of 20 energy-minimized conformers for both structures (Fig. 2, B and E) show well defined regular secondary structure regions with small backbone displacements, but a less well defined loop region connecting ␤3 and ␤4. The average global r.m.s.d. values for the ToxB and toxb ensembles are 0.19 and 0.28 Å, respectively, for backbone residues in regular secondary structure and 0.78 and 0.63 Å for all heavy atoms   (Fig. 3A, right).
ToxB and toxb have 13 non-identical amino acid residues (shaded in Fig. 1A) and in Fig. 3B these are mapped onto the  Table 1.
ribbon diagram of ToxB. They comprise three conserved (Glu/ Asn, Lys/Arg, Val/Leu), five semi-conserved (Val/Thr, Ala/Val, Ser/Asp, Thr/Asn, Asn/Ser) and five non-conserved (Arg/Ile, Phe/Arg, Gln/Ala, Ser/Val, Val/Ser) substitutions. Substitution of the first two non-identical amino acid residues in ToxB by those of toxb (Val 3 to Thr at the N terminus of ␤1 and Ala 12 to Val in the loop region separating ␤1 and ␤2) each diminished toxic activity of ToxB, and the Val 3 substitution altered protein mobility on reducing SDS-PAGE (Fig. 1B). Both substitutions are within a segment of the N-terminal region identified as necessary for chlorosis-inducing activity of ToxB (16). In ToxB, the amide proton and carbonyl oxygen of Val 3 are separated by 2 and 2.3 Å from the carbonyl oxygen and amide protons of Gly 61 and Gly 62 , respectively (Fig. 3C), and are involved in interstrand (␤1-␤6) hydrogen bonds with these two C-terminal residues. The corresponding atoms of Thr 3 in toxb are separated by 2.3 and 4.2 Å from Gly 62 and Gly 63 , respectively. (The number increase is because of a single residue insertion in toxb.) The greater distance between Thr 3 and Gly 63 abolishes interstrand hydrogen bonds between these two residues. The absence of this hydrogen bond in toxb could make this region more flexible than the corresponding region in ToxB. In both proteins, the main chain carbonyl oxygen of Ala 12 (ToxB) or Val 12 (toxb) are hydrogen bonded to the main chain amide proton, and the side chain carbonyl oxygen of Asn 8 .
Dynamics of ToxB and toxb-Steady-state 1 H-15 N heteronuclear NOEs, sensitive to the mobility of individual N-H bond vectors on the picosecond-nanosecond time scale, were measured for each backbone N-H to assess the potential contributions of changes in dynamics to absence of activity. Both proteins are well ordered with ToxB showing homogeneous dynamics throughout the protein and toxb showing more flexibility in specific regions (Fig. 4, A and B). T 2 relaxation, which has contributions from motions in the microsecondmillisecond time scale, is lower on average for inactive toxb (0.11s) than ToxB (0.16 s) (Fig. 4, C and D). Lower T 2 values could be either due to a more expanded structure or to intermediate exchange with minor populations of multimers. Taken together, the dynamics data suggest increased flexibility in regions of toxb localized to the ␤3-loop-␤4 and ␤5-loop-␤6 segments (Fig. 4E) and a more expanded overall structure.
The most significant differences between ToxB and toxb heteronuclear NOE values, shown in yellow on the ToxB structure (Fig. 4E) are localized to residues within ␤3 (Gly 22 , Gly 23 , Glu 24 , Arg 26 ), ␤4 (Ser 34 , Tyr 35 , Leu 36 , Ala 39 ), the loop connecting them (Val 29 and Gly 30 ), ␤5 (Gly 44 ), and the long loop connecting ␤5 and ␤6 (Thr 48 , Gln 50 , Phe 52 , and Ile 53 ), which are all located on one half of the sandwich fold. Changes in the other sandwich half are few and correspond to one residue in the loop between ␤1 and ␤2 (Ile 9 ), one at the beginning of ␤1, and one at the end of ␤2.
ToxB Homologs-Sequence similarity searches of fungal genome sequences identify ToxB homologs in two classes of fungi, the Sordariomycetes and the Dothideomycetes (Table 2). Interestingly, all fungi that contain these homologs are associated with plants, either as pathogens with varying lifestyles or endophytes. Estimation of evolutionary conservation using ConSurf (29) shows that residues in regions that correspond to ␤1, ␤2, and ␤5 are more highly conserved than in the other ␤-strands (Fig. 4F). Conservation is highest at the beginning and end of ␤1 (Cys 2 , Asn 8 ), the end of ␤2 (Cys 18 ), the end of ␤4 (Ala 39 ), ␤5 (Cys 43 , Gly 44 ), and the C-terminal residues (Gly 62 and Cys 64 ). Two conserved residues within loops, Asn 10 (within the loop connecting ␤1 and ␤2), and Gln 50 (within the loop connecting ␤5 and ␤6), are not anticipated to contribute to the stability of the fold but could instead play a key role in targeting interactions with partner proteins. The most variable amino acids are located in the ␤3-loop-␤4 segment. Structural similarity searches of the Protein Data Bank performed with the DALI (30) and PROFUNC (31) servers identify the avirulence protein AvrPiz-t (Protein Data Bank code 2LW6) (32), produced by the causal agent of rice blast disease, Magnaporthe oryzae, as structurally similar to ToxB (sequence identity of 20%, Z-score ϭ 5.0, r.m.s.d. of 2.3 Å) (Fig. 5A). Both proteins have identical topologies (Fig. 5, B and C), with each composed of two three-stranded anti-parallel ␤-sheets formed by ␤1-␤2-␤6 in one sheet, and ␤3-␤4-␤5 in the other. AvrPiz-t contains one short range disulfide bond that links strands ␤4 and ␤5 and a potential disulfide that could bridge Cys 5 in ␤1 and Cys 52 in the loop region between ␤4-␤5 but was not reported in the NMR structure (Fig. 5C).

Biologically Active and Inactive ToxB Variants Have Similar
Structures but Different Dynamics-The host-selective toxin ToxB and its naturally occurring inactive variant toxb have the same ␤-sandwich topology and virtually indistinguishable structural characteristics, including disulfide bonds that bridge the sandwich halves. Both structures contain an unusually long 9 -10 amino acid aperiodic but highly ordered loop between strands 5 and 6. Comparative analysis of ensemble structures identifies small differences for residues Gly 17 , Lys 38 , Ala 39 , Val 51 , Glu 56 , and Gly 61 (Fig. 3A). Of these residues, only 38 and 51 are different in toxb (Lys/Arg and Val/Ser). The other residues are primarily in spatial proximity to the Cys 18 -Cys 64 disulfide bond; Gly 17 , which precedes Cys 18 , is close to Ala 39 and Gly 61 .
Interestingly, inactive toxb is more flexible than active ToxB primarily in residues in ␤3, ␤4, and the loop connecting ␤5 and ␤6, all of which are located on one-half of the sandwich fold. These regions with higher flexibility correlate with segments of the protein with the most sequence variable residues (␤3turn-␤4 segment and the long loop connecting ␤5 to ␤6) (Fig.  4E). Such correlation is also observed for a large set of proteins  The arrows correspond to segments that make up the six ␤-strands. E, regions that are significantly more rigid in ToxB (shown in yellow) are mapped onto the ribbon representation of the ToxB structure. ␤3 and ␤4 are more rigid in ToxB than in toxb. F, the degree of amino acid conservation of ToxB homologs mapped onto the ribbon structure of ToxB (color-coded gradient from blue (variable) to magenta (conserved)). Highly conserved residues (except Gly 44 ) are labeled. Sequences from the ToxB protein family were analyzed with ConSurf, a bioinformatics tool for estimating the evolutionary conservation of amino acid positions in proteins. N, N-terminal; C, C-terminal.

TABLE 2 Fungal species with ToxB sequence homologs
ToxB homologs were obtained by a tblastn search of the NCBI GenBank TM nucleotide collection (nr/nt) and the Joint Genome Institute fungal genome database with the mature peptide sequence of ToxB. GenBank TM nos. and genome scaffold locations of homologues are listed in the reference column.  (33). Sequence variation in the dynamic region enables the adaptation of the protein to multiple binding substrates while keeping the native fold and is proposed to provide the balance between mobility and chemical specificity (33).

Organism
There is growing evidence that allosteric activation/deactivation of proteins in the absence of changes in protein structure is modulated by changes in protein dynamics. The catabolite-activating protein is one such example (34). Other examples include ␥D-crystallin for which mutations that abolish activity do so by changing the protein dynamics, but not the global structure. Specific examples are the P23T mutant whose altered motional behavior initiates association (35) and the W24R mutant whose increased dynamics increase susceptibility to protease digestion (36). Another example is guanylate kinase, where a single mutation completely changes the protein ) Brackets indicate cysteines that form disulfide bonds. The six ␤strands for each protein are represented by arrows above (ToxB) or below (AvrPiz-t) the sequence alignment. Stars indicate identical residues; colon indicates conserved residues; and period indicates semi-conserved residues. Ribbon diagrams of the solution structures of ToxB (B), and AvrPiz-t (C) with their corresponding topology diagrams shown below the sequence alignment. D, amino acid differences between active and inactive ToxB homologs. Sequence alignment of either active (A) or inactive (I) ToxB variants from different isolates of P. tritici-repentis (Ptr) and P. bromi (Pb). P. tritici-repentis ToxB, P. tritici-repentis toxb, P. bromi ToxB1, and P. bromi ToxB2 are from GenBank TM accession numbers AY007692, AY083456, ABR23219, and ABR23218, respectively. Red residues indicate differences between amino acids of variants from the same species. Identical residues and conservative substitutions are highlighted with black and gray background, respectively. N, N-terminal; C, C-terminal. dynamics and function but not the global structure of the protein (37). ToxB appears to belong to this class of proteins whose activity could also be modulated by changes in dynamics rather than structure. An increase in flexibility as observed with toxb implies a larger conformational entropic penalty, which could result in weaker or abolished binding to putative targets and loss of activity (34).
Compactness in the Vicinity of the Cys 18 -Cys 64 Disulfide Bond and Toxin Activity-A variety of evidence points to the possible involvement of changes in compactness in the vicinity of Cys 18 -Cys 64 disulfide bond in regulating activity. First, inactive toxb is more susceptible to disulfide bond reduction as shown by the presence of two bands in SDS-PAGE for toxb only, one for the oxidized protein and one for the reduced. Active ToxB in comparison shows only a single band for the oxidized. Second, chimeric proteins that contain the N terminus of ToxB all resolve as a single band on SDS-PAGE, whereas those that contain the N terminus of toxb resolve as two bands (summarized in Fig.  1B) (16). In the N-terminal chimeric proteins, there are only two amino acid differences between ToxB and toxb: a Val-to-Thr at position 3, and an Ala-to-Val at position 12. When these residues are mutated one at a time, the Val 3 to Thr substitution shows increased propensity to disulfide bond reduction, whereas the Ala 12 to Val substitution shows no change (16). Our explanation for this observation is that a Val 3 to Thr substitution results in a slightly expanded structure, as observed in toxb (Fig. 3C) where the disulfide bond is farther from Gly 63 . The more open structure of inactive toxb is supported by lower T 2 values due to slower tumbling (Fig. 4) and faster elution of toxb compared with ToxB in gel filtration studies (data not shown). Therefore, activity could be correlated with amino acid substitutions that increase the conformational mobility in onehalf of the ␤-sandwich and that expand the structure in the vicinity of the Cys 18 -Cys 64 disulfide bridge.
Loop 1 Is a Proposed Site for Interactions with Putative Host Targets-Substitution of Ala 12 with Val in toxb does not change the hydrogen bonding pattern of the protein and has no observable effect on the stability of the loop between ␤1 and ␤2 (loop 1). Interestingly, however, this substitution in ToxB renders the protein partially inactive (16). As the Ala-to-Val substitution is not predicted to impact the overall structure and dynamics of the protein, the most plausible explanation for the partial loss in activity is that loop 1 is an important site for host interactions, and the Ala/Val substitution disrupts the interaction surface. Thus far, no putative interacting site(s) or partners have been identified for ToxB or any of its homologs. Further support for loop 1 as an interacting surface comes from two variants of ToxB (P. bromi ToxBs) from P. bromi, the sister species to P. tritici-repentis. P. bromi ToxB1, an active toxin, and P. bromi ToxB2, an inactive toxin, have virtually identical sequences (94.5% identical), are 77-78% identical to ToxB (Fig. 5D) (17), and are expected to adopt a similar fold to the P. tritici-repentis ToxB structures. The most significant difference between the P. bromi ToxB variants is substitution of a neutral Gln with a positively charged Arg, which based on the structure of ToxB reported here, map to loop 1 (the other non-identical residues Leu 36 /Ser 36 , and Thr 49 /Ser 49 map to ␤4, and the loop region between ␤5 and ␤6, respectively, and are conservative changes expected to have minimal effect on the overall structure and dynamics). The expectation that this single substitution is responsible for inactivation of the P. bromi ToxB homologs supports our inference that loop 1 is an interacting surface where substitutions could impact interactions with a partner and modulate toxin activity. This position is occupied by negatively charged Glu in ToxB. We predict that a change of Glu or Gln to an Arg is enough to disrupt total activity, whereas a change of Ala to Val at a neighboring position in this loop abolishes some of the activity (Fig. 1) (16) but requires increased dynamics caused by additional amino acid differences in toxb to abolish full activity.
Implications of Structural Similarity between P. tritici-repentis ToxB and M. oryzae AvrPiz-t-ToxB has a similar fold to the avirulence effector protein, AvrPiz-t produced by the rice blast fungus, M. oryzae. AvrPiz-t and ToxB are both effectors contributing to the virulence of the fungus that produces them. ToxB is described as a host-selective toxin because its application to wheat tissue causes cell death only on wheat genotypes that contain a dominant gene for toxin sensitivity. Cell death induced by ToxB supports virulence of P. tritici-repentis because it is a necrotrophic pathogen. AvrPiz-t confers virulence to the biotrophic fungus, M. oryzae, by suppressing defense in rice (38). However, if rice contains the dominant Piz-t gene for resistance to M. oryzae, recognition of AvrPiz-t by the product of the Piz-t gene leads to cell death, disease resistance, and a lack of virulence by M. oryzae. Thus, host cell death is shared between susceptibility to P. tritici-repentis and resistance to M. oryzae. The structural homology between ToxB and AvrPiz-t suggests the tantalizing possibility that they also share a common mechanism for causing cell death, and thus, that the gene conferring sensitivity to ToxB, and consequently disease susceptibility in wheat, shares properties of a resistance gene. A shared function between ToxB and AvrPiz-t would provide significant support to the emerging hypothesis that genes that confer resistance to biotrophic pathogens can also confer susceptibility to necrotrophic pathogens (5, 39 -41).
Concluding Remarks-In summary, analyses of the structural features of P. tritici-repentis ToxB and its non-toxic homolog P. tritici-repentis toxb identify three potential processes that could render the protein inactive: increased flexibility in one sandwich half, expanded structure in the vicinity of Cys 18 -Cys 64 disulfide, and differences in a solvent-exposed loop region that likely impact interactions with a putative partner. All features are necessary for complete absence of chlorosis-inducing activity and would explain why activity is not fully abolished in chimeras that include either the N-terminal region (region with active site and high resistance to disulfide reduction in ToxB) or both the central and C-terminal regions (regions that display increased dynamics in toxb) (Fig. 1) (16). Sequence-based analyses of variants of P. bromi ToxB, closely related homologs of P. tritici-repentis ToxB, suggest that toxin activity is abolished by a change of Gln/Arg in loop 1 that significantly alters the electrostatic surface of this loop. Taken together, it appears that nature employs two mechanisms to modulate toxic activity: either by introducing a dramatic change at the interface loop as in an inactive form of P. bromi ToxB or by allosteric coupling of increased protein dynamics and expansion with small perturbations of the active site as in toxb.