Structural and Functional Analyses Reveal Insights into the Molecular Properties of the Escherichia coli Z Ring Stabilizing Protein, ZapC*

In Escherichia coli cell division is driven by the tubulin-like GTPase, FtsZ, which forms the cytokinetic Z-ring. The Z-ring serves as a dynamic platform for the assembly of the multiprotein divisome, which catalyzes membrane cleavage to create equal daughter cells. Several proteins effect FtsZ assembly, thereby providing spatiotemporal control over cell division. One important class of FtsZ interacting/regulatory proteins is the Z-ring-associated proteins, Zaps, which typically modulate Z-ring formation by increasing lateral interactions between FtsZ protofilaments. Strikingly, these Zap proteins show no discernable sequence similarity, suggesting that they likely harbor distinct structures and mechanisms. The 19.8-kDa ZapC in particular shows no homology to any known protein. To gain insight into ZapC function, we determined its structure to 2.15 Å and performed genetic and biochemical studies. ZapC is a monomer composed of two domains, an N-terminal α/β region and a C-terminal twisted β barrel-like domain. The structure contains two pockets, one on each domain. The N-domain pocket is lined with residues previously implicated to be important for ZapC function as an FtsZ bundler. The adjacent C-domain pocket contains a hydrophobic center surrounded by conserved basic residues. Mutagenesis analyses indicate that this pocket is critical for FtsZ binding. An extensive FtsZ binding surface is consistent with the fact that, unlike many FtsZ regulators, ZapC binds the large FtsZ globular core rather than C-terminal tail, and the presence of two adjacent pockets suggests possible mechanisms for ZapC-mediated FtsZ bundling.

In Escherichia coli, the bacterial tubulin-like GTPase, FtsZ, drives cell division. Unlike the microtubule structures formed by tubulin, FtsZ forms protofilaments that combine to create a ring-like structure at midcell called the Z-ring, which mediates cell division (1)(2)(3)(4)(5). FtsZ is an ancient and highly conserved protein that is responsible for cell division in most bacteria as well as many archaea, all chloroplasts, and the mitochondria of primitive eukaryotes (4). FtsZ is made up of five main domains: an N-terminal region, which is largely disordered, a globular core that contains the nucleotide binding site and the T7 synergy loop needed for nucleotide hydrolysis, a long linker of variable sequence and length (ϳ40 -257 residues), a short ϳ15residue C-terminal tail (CTT) 3 that contains a highly conserved set of residues critical for the docking of several FtsZ interacting proteins, and a more recently defined C-terminal variable (CTV) region (4,6). Linear protofilaments are created by GTP binding to the globular domains of FtsZ between different protomers (1,7,8). The dynamic assembly and disassembly of protofilaments resulting from cycles of GTP binding and hydrolysis leads to Z-ring remodeling that is thought to contribute to the constrictive force required for cell division (4,9,10).
In E. coli the intracellular levels of FtsZ remain essentially the same throughout the cell cycle and exceed the critical concentration required for creation of the Z-ring (11). Therefore, the regulation of Z-ring formation occurs at the level of FtsZ filament assembly. FtsZ interacting proteins modulate FtsZ polymerization and thus play important roles in this process (4,5,(13)(14)(15)(16)(17)(18)(19)(20)(21)(22)(23)(24)(25)(26)(27). In E. coli at least 24 proteins have been identified that promote the assembly/disassembly processes of FtsZ at midcell (28,29). Cells lacking the division proteins FtsZ and FtsA fail to constrict and exhibit a lethal division phenotype (1,5). FtsZ regulatory division proteins such as the Zap proteins have functionally redundant roles making them individually nonessential (1,12,29). Nevertheless, these regulators have important roles in cell viability as assessed by the resultant inhibition of cell division or synthetic lethal phenotypes resulting when two or more of them is deleted (1,12). The nature of the selective pressure that ensures the presence of several FtsZ regulatory proteins with redundant functions in Z-ring stability in E. coli is not clearly understood. But it is thought that each of these proteins may perform a beneficial function in FtsZ polymerization and stability under specific environmental conditions. Thus, probing the precise molecular interactions of each FtsZ-associ-ated protein with FtsZ may begin to provide clues into the biology of Z-ring maintenance in E. coli and related species.
Among the many FtsZ regulatory proteins are the FtsZ ringassociated (Zap) proteins, ZapA-E (13)(14)(15)(16)(17)(18)(19)(20)(21)(22)(23)(24)(25)(26)(27). With the exception of ZapE, these proteins are recruited early during cytokinesis and have overlapping functions in stabilizing Z-ring formation at the midcell (13-17, 20, 21). ZapE was only recently discovered and represents an FtsZ regulator that functions under specific environmental stress. In particular, it is active during high temperatures (Ͼ37°C) or oxygen depletion (18). ZapE is a Walker ATPase, and by some unknown mechanism it reduces the stability of FtsZ polymers in the presence of ATP (18). By contrast, the remaining Zaps, ZapA-D, act under normal cellular conditions and either directly or indirectly stabilize the Z-ring by increasing lateral interactions and bundling of FtsZ protofilaments. Such bundling is assumed to provide stability to the Z-ring in vivo (12-17, 20, 21). ZapA and ZapB are coiled coil proteins, and studies have shown that ZapA promotes the assembly and stability of the Z-ring by cross-linking adjacent FtsZ protofilaments (14 -17, 19, 30 -33). The absence of ZapA leads to cell elongation (14). ZapB does not bind FtsZ directly but is recruited to the divisome via its interaction with ZapA where it is thought to enhance the role of ZapA in FtsZ bundling (16,32). In addition, ZapB plays a role in chromosome segregation through its interaction with MatP (34). ZapC and ZapD interact directly with FtsZ and also promote bundling of FtsZ protofilaments (13,20,21). Although ZapA is widely conserved, ZapB-D are mostly restricted to the ␥-proteobacteria.
ZapC is arguably the least understood Zap from a molecular standpoint, with no known structures or structures of homologs available. The studies that have been carried out on ZapC show that it is an early assembly protein that co-localizes with FtsZ at midcell and promotes interactions between FtsZ protofilaments in the Z-ring (20,21). These analyses also revealed that cells lacking ZapC show marginal increases in cell length. However, a zapA zapC double mutant displayed measurably longer cells and a greater variability in the bacterial population compared with cells with zapA or zapC single mutants, thus underscoring the overlapping functions of these proteins in Z-ring stability (13,21). Consistent with its role in FtsZ bundling, overexpression of ZapC leads to aberrant hyperstable Z-ring structures and lethal filamentation. ZapC binds FtsZ directly in vitro and enhances FtsZ assembly into protofilament bundles. ZapC also suppresses the GTPase activity of FtsZ (20 -21).
To gain insight into the function of E. coli ZapC at the molecular level we determined its crystal structure to 2.15 Å resolution. Structural and biochemical studies indicate that ZapC is a monomer with a previously unobserved overall fold. Two pockets were identified on the structure; one in each of its two domains. Genetic and biochemical studies showed that residues in both domains are involved in FtsZ binding and bundling. Additional data demonstrated that ZapC interacts with the globular core of FtsZ, not its C-terminal tail. Thus, the combined findings suggest that ZapC utilizes a novel mechanism in which a monomeric ZapC facilitates FtsZ bundling via interactions within its GTPase globular region.

Experimental Procedures
Purification and Crystallization of E. coli ZapC-An artificial gene encoding zapC that was codon-optimized for expression in E. coli was purchased from Genscript Corp. (Piscataway, NJ). The gene was subcloned into the pET15b vector such that it expressed an N-terminal hexahistidine tag (His tag) for purification. The zapC expressing pET15b vector was transformed into E. coli C41(DE3) cells. For protein expression, the zapCexpressing cells were grown to an A 600 of 0.6 -0.8 and induced with 1 mM isopropyl ␤-D-1-thio-galactopyranoside (IPTG) for 4 h at 37°C. Cells were lysed in buffer A (25 mM Tris, pH 7.5, 300 mM NaCl, 5% glycerol, 10 mM ␤-mercaptoethanol) using a microfluidizer. Cell debris was removed by centrifugation at 17,000 rpm, and the resultant lysate was loaded onto a Ni-NTA column. The column was washed with increasing concentrations of imidazole in buffer A and ZapC eluted with 100 -500 mM imidazole. The protein was Ͼ90% pure after Ni-NTA chromatography as assessed by SDS-PAGE analysis. However, the ZapC(K94D) mutant was only ϳ75% pure after the Ni-NTA step, and size exclusion chromatography was necessary to obtain Ͼ90% pure protein for analyses.
For crystallization, the purified WT protein was buffer-exchanged into 50 mM Tris, pH 7.5, 300 mM NaCl, 5% glycerol, and 10 mM DL-dithiothreitol (DTT). ZapC contains five cysteines. High levels of reducing agent (either 10 mM ␤-mercaptoethanol or 10 mM DTT) were required for protein stability, likely due to the otherwise rapid oxidation of the cysteine residues.
Selenomethionine-substituted ZapC protein was obtained by using the methionine inhibitory pathway. Briefly, an overnight culture harboring pET15b-zapC was centrifuged, and the cell pellet was thoroughly washed with M9 media to remove any methionine. Washed cells were then resuspended in M9 media and used to inoculate 18 liters of M9 media. The cells were grown to an A 600 of ϳ0.5 at which point 50 mg/liter selenomethionine and 40 mg/liter amino acids that inhibit selenomethionine biosynthesis were added. The cells were grown for an additional 15 min and induced with 1 mM IPTG for 4 h. The purification of selenomethionine ZapC was performed as for the wild type (WT) protein with the exception that 20 mM reducing agent (␤-mercaptoethanol or DTT) was used in all buffers. Crystals of both the native and selenomethionine-substituted protein were grown via hanging drop vapor diffusion by mixing protein (at 20 -40 mg/ml) 1:1 with a reservoir of 1.5 M sodium citrate, 0.1 M cacodylate, pH 6.5. Crystals took 2 weeks to grow to maximum size and were cryo-preserved by dipping them in a solution supplemented with 20% glycerol for 4 s before placement in the cryo-stream.
Structure Determination and Refinement of the ZapC Structure-The ZapC crystals take the space group C2, with a ϭ 66.0 Å, b ϭ 46.7 Å, c ϭ 62.9 Å, and ␤ ϭ 105.7°. The structure was solved by multiple wavelength anomalous diffraction (MAD) using data obtained to 2.40 Å of crystals grown with selenomethionine substituted ZapC protein (35,36). Inverse beam data collection was employed at three wavelengths, corresponding to the selenomethionine peak and inflection and a remote wavelength. The heavy atom substructure was obtained via SOLVE and resulted in a figure of merit of 0.53 (35). Density modification (RESOLVE) was then used to generate an improved electron density map, which was readily traced. The map revealed one ZapC subunit in the crystallographic asymmetric unit. Subsequent to model construction into the MAD electron density map and initial refinement of the structure, a native x-ray intensity data set was collected of a wild type (nonselenomethionine substituted) crystal to 2.15 Å at Advanced Light Source beamline 8.3.1 for final refinement, which was performed using Phenix (37). All x-ray intensity data were processed with MOSFLM (38). The final model includes ZapC residues 2-168 (residues 169 -180 were disordered) and 109 solvent molecules. ZapC model refinement statistics are presented in Table 1.
Size Exclusion Chromatography (SEC)-SEC was used to probe the molecular weights of ZapC and ZapC mutants. All SEC experiments were performed using a HiLoad 26/600 Superdex 75 prep grade column. Experiments were performed in a buffer containing 300 mM NaCl, 5% glycerol, and 20 mM Tris HCl, pH 7.5, 10 mM ␤-mercaptoethanol.
Glutaraldehyde Cross-linking-Glutaraldehyde cross-linking was performed as another method to assess the molecular weight of ZapC. For these experiments, purified ZapC at 3 mg/ml in 50 mM Hepes, pH 7.0, 100 mM NaCl was cross-linked with 0.2% glutaraldehyde (final concentration) at various time points. The reaction was quenched by the addition of 100 mM (final concentration) Tris HCl, pH 8.0. At concentrations Ͼ0.3% glutaraldehyde the protein precipitated within minutes. Hence, 0.2% glutaraldehyde was used.
Strains, Plasmids, and Growth Conditions-All strains and plasmids used in the study are listed in Tables 2 and 3. E. coli strains were grown in LB (0.5% NaCl) with appropriate antibiotics (ampicillin, 100 g/ml; kanamycin, 50 g/ml; or spectinomycin 100 g/ml) at 37°C unless stated otherwise. Yeast strains were maintained in yeast peptone dextrose media or in selective yeast nitrogen broth (YNB) complete media lacking leucine (ϪL), uracil (ϪU), or tryptophan (ϪT) at 30°C.
Plasmid Construction-Plasmids expressing WT ZapC or mutant ZapC proteins in the pNG162 vector under the control of an IPTG-inducible promoter were constructed by amplifying zapC or zapC mutants using ZapC BamHI forward and pNG162 ZapC HindIII reverse primers from the pGBDU-C1-zapC or zapC mutant constructs. The PCR products were digested by BamHI and HindIII and ligated into the pNG162 vector at the same sites. To create GFP fusions, zapC or zapC mutants were amplified with ZapC BamHI forward and ZapC no stop SalI reverse primers, and the products were digested with BamHI and SalI and ligated into the pDSW208 vector treated with the same enzymes. The resulting clones were verified by Sanger sequencing (Genewiz).
Site-directed Mutagenesis-Appropriate primer pairs containing the desired mutations were used to amplify zapC using the QuikChange site-directed mutagenesis kit (Agilent). The amplified DNA was incubated with DpnI, which digests the

Structure of the E. coli Z Ring Stabilizer ZapC
methylated parental DNA strands. The DNA was then transformed into DH5␣ cells and plated onto Luria broth-agar plates. Plasmids were transformed into C41(DE3) cells, and the mutations were confirmed by sequencing. The resulting transformed cells were used for protein expression and purification as described for the WT protein. For yeast two-hybrid studies, sequence-verified mutant clones were digested with BamHI and SalI restriction enzymes and ligated into the pGBDU-C1 vector.
Protein Expression-Plasmids pET21b-ftsZ and pET28b-His10-Smt3 carrying zapC or zapD were expressed and purified as described (6,13,20). Removal of this tag leaves only one non-native residue (serine) at the protein's N terminus. This ZapC protein was used in all functional assays. Plasmid pET11b carrying ftsZ 1-372 was created by amplifying an ftsZ fragment with FtsZ372-F1 and FtsZ372R1 primers. The product was digested with KpnI and BamH1 and used to replace the KpnI/ BamH1 fragment in the pET11b-ftsZ plasmid. FtsZ 1-372 protein was purified essentially as described (20). Plasmids pET28b-His10-Smt3 carrying zapC mutants were constructed by amplifying with SUMO-5 ZapC-BamHI forward primer and SUMO-3 ZapC-HindIII reverse primer from the appropriate pNG162-zapC mutant clones, and the PCR products were digested with BamHI and HindIII and ligated into the same sites in the vector. Sequence verified clones were transformed into C41(DE3) cells for protein expression.
Yeast Two-hybrid (Y2H) Assays-pGBDU-C1-or pGAD-C1based zapC or ftsZ plasmid clones were chemically transformed into PJ69-4A or SL3004 yeast strains. Appropriate pairs of transformants from Ϫleucine or Ϫuracil plates were mated on yeast extract/peptone/dextrose media at room temperature. Diploid yeast strains were grown selectively in YNB (Ϫleucine/ uracil) broth at 30°C for ϳ20 h until A 660 ϭ 0.5-1.0, at which point ␤-galactosidase measurements were conducted using a Y2H assay kit essentially as described by the manufacturer (Thermo Fisher Scientific).
Spot Viability Assays-Overnight cultures of WT (MG1655) strains bearing ZapC or ZapC mutant (native or GFP fusion) plasmids were grown in LB with 0.2% glucose containing appropriate antibiotics at 37°C. Cells were normalized to A 600 ϭ 1.0 and were serially diluted from 10 Ϫ1 to 10 Ϫ5 . 3 l from each dilution was spotted on LB plates with appropriate antibiotics without or with IPTG at 25, 50, or 100 M final concentrations and grown for ϳ16 h at 37°C at which point plates were imaged (Syngene).
Fluorescence Microscopy-Overnight cultures of WT (MG1655) cells bearing ZapC-GFP or mutant ZapC-GFP fusion plasmids were grown in LB containing appropriate antibiotics at 37°C. Cells were subcultured in the same medium at 37°C until A 600 ϭ 0.2-0.3, at which point a range of IPTG at 0 -100 M final concentration was added to the cultures, and growth was continued to A 600 ϭ ϳ0.6 -0.8. Cells were then immobilized on 1.5% agarose pads and imaged using a Nikon TiE microscope essentially as described (13).
Western Analysis-WT cells bearing ZapC-or mutant ZapC-GFP fusion plasmids were grown as described above and prepared for Western analysis. Samples were normalized to A 600 , and proteins were separated on a 12.5% SDS-PAGE gel. Levels of ZapC, FtsZ, and RpoD (loading control) were probed using a rabbit polyclonal anti-GFP (Thermo Fisher Scientific), a rabbit polyclonal anti-FtsZ (Genscript), or a mouse monoclonal anti-RpoD primary antibody (BioLegend). Appropriate IRDye secondary antibodies were used for detection (LI-COR). Band a This work unless otherwise stated. b Plasmids were obtained from the Arabidopsis Genetic Resource Center (ABRC).
intensities were measured with an Odyssey CLx Infrared Imaging System (LI-COR). Sedimentation Assay-FtsZ sedimentation assays were conducted essentially as described (13,21). Briefly, 5 M of purified FtsZ or FtsZ 1-372 was combined with purified 1 or 5 M ZapC, mutant ZapC, or ZapD proteins in a reaction buffer (50 mM K-MOPS, pH 6.5, 50 mM KCl, 2.5 mM MgCl 2 ) containing 3 M BSA. Polymerization was initiated by the addition of 1 mM GTP to the assembled reaction. Reaction mixtures (100 l) were processed at room temperature, and products were recovered by centrifugation using a TLA100.3 rotor at 80,000 rpm for 10 min. Equivalent amounts of supernatant and pellet fractions were separated on 15% SDS-PAGE gels and visualized by staining with Simply Blue Safe Stain (Thermo Fisher Scientific).
Electron Microscopy-FtsZ polymerization reactions were performed essentially as described above but without the addition of BSA. After incubating for 5 min at room temperature, a 10-l aliquot was placed on a carbon-coated copper grid and negatively stained with 2% uranyl acetate for ϳ5 min and wicked dry. Images were collected on a JEOL 2100 Lab6 transmission electron microscope operated at 200 kV with 30 pA/cm 2 current density and recorded on a US1000 XP1 camera at a nominal magnification of ϫ30,000.

Results
Structure Determination of E. coli ZapC-To gain insight into the molecular function of ZapC we determined its structure by selenomethionine MAD ("Experimental Procedures"). The quality of the MAD electron density map was excellent and permitted facile tracing of the structure (Fig.  1A). After initial model construction, a native x-ray intensity data set was obtained to 2.15 Å resolution and used for final refinement. The ZapC model had R work /R free values of 19.7%/23.1% (Table 1).
Overall Structure of E. coli ZapC-Database analyses show that there are currently no proteins in the database that display significant overall structural similarity to ZapC (39). The ZapC structure has the following topology, ␤1(residues 9 -15)-  (Fig. 1, B and C). Only C-terminal residues 169 -180 are disordered in the structure, consistent with the fact that although the ZapC C-terminal region is relatively conserved among enteric bacteria, this region shows significant diversity in both length and sequence among ZapC homologs in other bacteria (Fig. 1D).
The ZapC structure is composed of two domains, an N-domain from residues 1-89, and a C-domain, from residues 90 -168. The region linking ␣4 in the N-domain to ␤4 is composed of a long loop (Fig. 1B). The ZapC N-domain consists of two long helices that pack nearly perpendicular to a threestranded antiparallel ␤-sheet. This domain also contains two short helices, ␣1 and ␣2. The C-domain is composed almost entirely of ␤-strands and has a ␤-barrel-like fold with a central, four-stranded twisted antiparallel ␤-sheet. This twisted ␤-sheet is located in the center of the domain and is surrounded on one side by the ␤7-␤8 hairpin and the other by ␣5 and the long loop region (Fig. 1B).
ZapC Is a Monomer-ZapC plays a similar role as ZapA in promoting the bundling of FtsZ protofilaments (20,21). Recent studies have indicated that ZapA carries out this role by functioning as a cross-linking agent to bridge FtsZ protofilaments between subunits of its dimer (33). The oligomeric state of ZapC, however, has been unclear. But prior genetic and biochemical data suggested that unlike ZapA, this protein may be a monomer (20). Consistent with this, analysis of the ZapC crystal packing revealed no oligomers with significant buried surface areas. Only one possible dimer interface was revealed by PISA as being somewhat energetically favorable as its interface is largely hydrophobic with a ⌬ i G, p value ϭ 0.187, where ⌬ i G p values Ͻ0.5 are suggestive of possible dimers ( Fig. 2A) (40). However, the buried surface area of this interface is only 550 Å 2 (for the dimer), which is much lower than known stable dimers.
As the oligomeric state of ZapC has key implications for its function, we performed SEC experiments to probe its molecular weight. SEC of WT ZapC revealed that it was primarily monomeric even at high concentrations (ϳ5 mg/ml); 92% of the protein eluted as a monomer with 8% running at the molecular weight corresponding to a dimer (Fig. 2B). To ascertain if the "dimer" population was due to the partially hydrophobic dimer observed in the crystals, a ZapC triple mutant, ZapC(A54Q/ F58E/R65E), was constructed to disrupt the dimer. Each of the three mutations alone would be predicted to strongly disfavor the dimer. The side chain of Ala-54 is 4.0 Å from that of Ala-54Ј (where the Ј indicates other subunit in the dimer), and hence any substitution other than glycine would lead to steric clash. Phe-58 stacks closely with Phe-58Ј so that a F58E substitution would be electrostatically unfavorable, and finally Arg-65 makes salt bridges with Glu-64Ј, and therefore a R65E substitution would also cause strong charge repulsion ( Fig. 2A). SEC analyses of the triple mutant revealed essentially the same monomer/dimer ratio (90%/10%). Thus, the data indicate that the dimer observed in the ZapC crystal is not found in solution, and WT ZapC appears to be a functional monomer. The small dimer peak appears to be due to the noted aggregation that takes place even in the presence of high levels of reducing agents. Moreover, glutaraldehyde cross-linking showed that ZapC remained almost entirely monomeric under conditions when a control oligomeric protein readily dimerized (data not shown). Thus, our experiments indicate that ZapC is monomeric and that the Ala-54 -Phe-58 -Arg-65 region is not involved in oligomerization. However, to assess if the hydrophobic surface region containing Ala-54 -Phe-58 -Arg-65 is involved in the FtsZ binding/bundling function of ZapC, we performed sedimentation studies with the triple mutant. The results revealed that ZapC(A54Q/F58E/R65E) displayed sedimentation properties that were essentially indistinguishable from the WT protein (Fig. 2C). Thus, these data indicate that the ZapC surface encompassing residues Ala-54 -Phe-58 -Arg-65 ( Fig. 2A)  dling in a manner distinct from the other Zaps. Closer examination of the ZapC structure revealed the presence of two adjacent pockets, one on the N-domain and one on the C-domain (Figs. 1C and 3, A and B). The pockets are separated by ridges formed by two loops; one composed of ␤3-␣1 on the N-domain and the other, the ␤8-␤9 connection in the C-domain (Fig. 3B). Notably, the N-domain contains two residues previously implicated as important for ZapC function, Leu-22 and Glu-72 (21).  Fig. 2A, Fig. 3, A-D, and Fig. 8 were generated using PyMOL. C, topology diagram of ZapC with ␤-strands shown as arrows and colored magenta, as in B, ␣-helices are colored cyan and shown as rods. D, sequence alignment of selected ZapC proteins. Highlighted in cyan are residues previously shown to be important in ZapC function (21) and in yellow, the basic residues that line the C-domain pocket that were analyzed for their affects on FtsZ binding and bundling. Identical/always conserved, highly similar/conserved, and semiconserved residues are indicated by asterisks, double dots, and dots, respectively, under the alignment. Also shown over the sequence are the secondary structural elements obtained from the structure. The sequences denote the following bacteria: gi 123777460 sp Q7CHK5. Substitution of Leu-22 to a proline led to an inactive ZapC that could not bundle FtsZ. Interestingly, the ZapC(L22P) was found to have increased self-association, possibly through alterations in the overall structure. If this pocket is involved in FtsZ binding, such structural changes would be predicted to impede the ZapC-FtsZ interaction. Residue Glu-72, also in this N-domain pocket, was identified as part of a double ZapC mutant, E72G/R164A, that was nonfunctional (21). In the ZapC structure, Arg-164 is located on the C-domain, and its side chain participates in hydrogen bonds with the C-terminal carbonyl groups of residues on the long interdomain loop and the side chain of Asp-163. As a result, Arg-164 is not exposed and thus not free to mediate contacts with outside proteins. Because Glu-72 is exposed to the surface, it seems a likely candidate for participating in protein-protein interactions, such as with FtsZ.
Strikingly, tag residues (from the His tag attached to the N terminus of the protein and used for purification) were found to bind the N-domain and interact directly with the Glu-72 side chain. Specifically, six of the tag residues are docked within the pocket and form a distorted ␤-strand that hydrogen bonds with Glu-72 as well as ␤3 in the N-domain (Fig. 3C). The finding that Glu-72 contacts a docked "peptide" lends support to the notion that it may be a residue involved in substrate (FtsZ) binding.
The N-domain pocket containing Leu-22 and Glu-72 is directly adjacent to a larger pocket located on the C-domain (Fig. 3, A, B, and D). Electrostatic surface analysis of ZapC shows that this large, exposed pocket has an exposed hydrophobic center with sides lined by multiple basic residues (Fig. 3, A  and B). Residues that contribute to the electropositive nature of the outside of the pocket include Lys-37, Lys-89, and Lys-94, FIGURE 2. Analysis of ZapC oligomeric state. A, ribbon diagram of possible ZapC dimer revealed by crystal packing. Shown as dotted surfaces are the three residues, Ala-54 -Phe-58 -Arg-65, that participate in this dimer and that were mutated to assess dimer formation. The small size of the Ala-54 side chain is essential for dimer packing, the two Phe-58 side chains stack together, and Arg-65 makes a salt bridge with Glu-64Ј. The buried surface area in this interface is 550 Å 2 , which is significantly lower than known stable dimers; however, the interface is largely hydrophobic with a (⌬ i G, p value ϭ 0.187), where ⌬ i G p value indicates the p value of the observed solvation free energy gain (40). The p value measures the probability of getting a lower than observed ⌬ i G when the interface atoms are picked randomly from the protein surface. p Ͻ 0.5 designates interfaces with higher than would-be average for given structures due to the hydrophobicity of the interface, suggesting that the interface could be interaction-specific. B, SEC analyses of WT ZapC and ZapC(A54Q/F58E/R65E). Both proteins eluted primarily as monomers (Ն90%). The inset is a plot used to deduce the M r . Proteins used as standards to generate the curve were cytochrome c, carbonic anhydrase, and albumin. mAu, milliabsorbance units. C, sedimentation analyses of the ZapC(A54Q/ F58E/R65E) triple mutant (QEE) showing properties essentially identical to WT ZapC, His-tagged ZapC, and ZapC(QEE) were used in these assays and were essentially similar to tag-free ZapC/FtsZ interactions. Equivalent aliquots of supernatants (S) and pellets (P) from co-sedimentation reactions in the presence of GTP were separated by SDS-PAGE and visualized. Lanes: 1, FtsZ alone; 2, FtsZ with WT ZapC; 3, FtsZ with ZapC(QEE); 4, FtsZ with ZapC(K94D); 5, ZapC(QEE) alone; 6, ZapC(K94D) alone. The bar graph represents the percent FtsZ (gray) and His-ZapC or His-ZapC(QEE)/ZapC(K94D) (black) amounts found in the pellet. Band intensities were measured using Image J (National Institutes of Health). Each bar shows the average amounts with S.D. of three independent trials.The first bar represents the reaction carried out with FtsZ alone and no ZapC variant. and Arg-150 (Fig. 3D). Lys-37 is located on the ledge formed by ␤3 and ␣1, and its side chain points into the C-domain pocket. Surface-exposed charged residues are typically not retained between protein homologs unless they are of functional importance. Therefore, it is notable that these basic residues which encircle the ZapC C-domain pocket are strongly conserved among ZapC proteins as either arginines or lysines (Fig. 1D).
The presence of the large hydrophobic/basic pocket in the ZapC C-domain was intriguing because it lies adjacent to the N-domain pocket and also because it harbors a strongly electropositive surface. The latter is of note because its interacting partner, FtsZ, is electronegative, and FtsZ polymerization properties are known to be affected by charge. Indeed, the importance of charge in FtsZ function was underscored by recent studies on the Bacillus subtilis FtsZ protein, which demonstrated that not only cations, but the electropositive residues located on its own CTT, facilitated its ability to polymerize and bundle (6,41). Although E. coli FtsZ filamentation does not appear to be similarly affected by its own CTT, it is also electronegative, and cations have been shown to impact its polymerization properties (4 -6). Thus, these combined data suggested the basic/hydrophobic C-domain pocket of ZapC as a possible FtsZ interaction site.

Residues in ZapC Pockets Contributed to Interaction with
FtsZ in a Y2H System-To probe the ZapC-FtsZ interaction and test structure based hypotheses, we employed a Y2H assay. The WT ZapC protein showed robust binding to full-length     WT ZapC (Table 4). On the other hand, substitutions to the opposite charge at each of the lysine or arginine residues significantly reduced interactions with FtsZ (Table 4). ZapC(K89D) and ZapC(K94D) substitutions failed to interact with FtsZ similar to the ZapC(L22P) mutant (Table 4). These results suggest that the C-domain pocket residues in ZapC may serve as an interaction site with FtsZ. To further test this hypothesis we carried out additional genetic and cytological studies.
Overexpression of ZapC(K89D) or ZapC(K94D) Did Not Lead to Lethal Filamentation-Increased expression of WT ZapC interferes with cell division by hyperstabilizing Z-rings and leading to lethal filamentation (20,21). We tested the ZapC C-domain pocket mutants for their ability to interfere with cell division upon overexpression by monitoring their viability. WT ZapC expression under leaky or at low inducer concentrations led to a severe plating defect. These viability defects were exacerbated at higher inducer concentrations (Fig. 4A). In contrast, overexpression of ZapC single mutants showed varying degrees of survival with ZapC(K89D) and ZapC(K94D) displaying growth even at the highest level of inducer concentration tested (Fig. 4A). Consistent with these data, overexpression of a ZapC-GFP fusion was toxic to the cell, but multicopy expression of ZapC(K89D)-GFP or ZapC(K94D)-GFP did not display any obvious plating deficiencies (Fig. 4B).
To examine whether the reduced toxicity upon overexpression of ZapC(K89D) or ZapC(K94D) arose from an inability of these mutant proteins to localize to midcell, we visualized the cell morphology and localization phenotypes of the mutant proteins. WT ZapC localized GFP to midcell even upon leaky expression from a multicopy plasmid (Fig. 5A). As reported previously, with increasing inducer concentrations, filamentation and aberrant ZapC-GFP structures were observed at periodic intervals along the cells (Fig. 5A). In contrast, cells expressing either ZapC(K89D)-GFP or ZapC(K94D)-GFP displayed diffuse localization of GFP even at all inducer concentrations with no obvious division defects (Fig. 5A).
To investigate whether the ZapC(K89D)-GFP and ZapC (K94D)-GFP overexpression phenotypes were simply due to changes in FtsZ levels or the instability of the ZapC-GFP fusion proteins, we probed both ZapC and FtsZ amounts by immunoblotting. FtsZ levels were unperturbed under all conditions tested (Fig. 5B). Although ZapC(K94D) levels were essentially similar to that of WT ZapC overexpression amounts, ZapCK89D levels were significantly lower, suggesting poor expression or excessive processing of this mutant protein (Fig. 5B). Therefore, we chose ZapC(K94D) for further study.
ZapC(K94D) Failed to Interact with FtsZ in Vitro-We examined the effects of the ZapC(K94D) mutant on FtsZ polymerization by using purified proteins in a FtsZ sedimentation assay and by visualizing morphological properties of FtsZ polymers by transmission electron microscopy. Notably, the K94D mutation did not affect folding as assessed by CD analyses. Moreover, ZapC(K94D) eluted with a near identical profile to the WT protein (92% monomeric and 8% dimeric). When incubated in the presence of GTP alone, ϳ20% of WT FtsZ was found in the pellet, and this amount increased 2-3fold in the presence of ZapC at 1:0.2 and 1:1 ratios of the two proteins with a significant amount of ZapC co-sedimenting with FtsZ under these reaction conditions (Fig. 6A). In contrast, the ZapC(K94D) mutant failed to promote an increase in pelletable FtsZ amounts even at 1:1 ratios, and ZapC(K94D) was mostly retained in the supernatant fractions (Fig. 6A).
Upon visualization of the reaction mixtures, FtsZ forms single protofilaments in the presence of GTP and large bundled polymeric assemblies in the presence of GTP and ZapC (Fig.  6B) (20,21). Unlike WT ZapC, in the presence of ZapC(K94D), FtsZ protofilaments do not associate to form polymeric assemblies (Fig. 6B). These results are consistent with the Lys-94 residue of ZapC being critical in mediating interactions with FtsZ.
ZapC Did Not Require the FtsZ CTT for Interaction-Unlike a number of FtsZ modulatory proteins, previous studies suggested that ZapC does not require the CTT for interaction with FtsZ (13). However, to analyze this in more detail we carried out Y2H and FtsZ sedimentation assays. These data revealed that ZapC bound to FtsZ fusions lacking the CTT residues (FtsZ 1-372 ) but failed to interact with FtsZ lacking the N-terminal and globular core residues (FtsZ 315-383 ) (Fig. 7A). The essential division protein ZipA, whose interaction with FtsZ CTT has been well characterized, and the FtsZ modulatory protein ZapD, which also interacts with FtsZ CTT, failed to interact with a FtsZ variant lacking the CTT residues (Fig. 7A) (13,42). To test more directly for interactions between ZapC and FtsZ, we conducted a FtsZ sedimentation assay with purified FL FtsZ and FtsZ  . Residues in the E. coli FtsZ CTT are not required for its polymerization (43,44). Consistent with earlier results, in the presence of GTP, purified ZapD increased pelletable amounts of FL FtsZ but failed to increase sedimentable amounts of FtsZ 1-372 , indicating the requirement of the CTT residues for the ZapD-FtsZ interaction (Fig. 7B) (13). By contrast, ZapC enhanced the sedimentation (ϳ2ϫ) of both FL FtsZ and truncated FtsZ 1-372 proteins, and appreciable levels of ZapC were present in the pellet in these reactions (Fig. 7B). These results align with the Y2H data and indicate that the FtsZ globular core mediates interactions with ZapC. Recent work by Bhattacharya et al. (45) also showed that the FtsZ CTT is not required for interaction with ZapC.

Discussion
The ZapA-D proteins enhance FtsZ lateral contacts, which promotes the interactions that give rise to Z-ring formation required for cell division. Both ZapA and ZapD are dimeric and hence could act as cross-linking reagents of FtsZ protofilaments. Recent structural and biochemical studies on the E. coli ZapA have provided strong support for the hypothesis that it functions as a dimeric cross-linking reagent, binding FtsZ protofilaments using its globular core regions (33). The molecular mechanism by which ZapC may affect FtsZ polymerization has been less clear as no structure has been obtained for it or for a homolog. Here we show that ZapC contains a previously unobserved fold that is composed of two domains. Furthermore, biochemical analyses showed that, unlike its Zap counterparts, ZapC is monomeric, suggesting that it employs a mechanism distinct from ZapA and ZapD in FtsZ bundling. Insight into ZapC function was provided by examination of the structure, which revealed two pockets that are present on each domain. A fortuitously bound tag pointed to a largely hydrophobic pocket in the N-domain as a potential protein binding site. Strikingly, this pocket is flanked by two residues shown to be important for ZapC's function as a Zap, with one of these residues, Glu-72, directly contacting the bound tag. Thus, this pocket appears to form at least part of the FtsZ interacting surface. Further analysis of the structure revealed that this pocket is directly adjacent to a larger pocket within the C-domain that is hydrophobic and basic in character. Our subsequent analyses of ZapC proteins with charge reversal mutations of residues in this region strongly support this pocket as also being important in FtsZ binding. Thus, the two pockets appear to form the nexus of the FtsZ binding surface of ZapC. Indeed, the mutation of residues, A54Q/F58E/R65E, which lie on the surface that is opposite to these pockets, had no effect on FtsZ binding.
The ZapC N-domain and C-domain pockets provide an extensive surface for protein-protein interactions, which is consistent with analyses showing that the FtsZ globular core binds ZapC and not its small CTT. Recent studies suggested that hydrophobic residues are important for the ZapC-FtsZ interaction (45). Our structure shows that the N-domain and C-do-main ZapC pockets that interact with FtsZ both contain exposed hydrophobic cavities, consistent with that supposition (45). However, we also found that basic residues at the sides of the C-domain pocket impacted the interaction of ZapC with FtsZ. This effect was only notable upon substitution of the basic residues to acidic residues; substitution to noncharged alanines had no effect. Thus, these residues may play nonspecific roles in complex formation, such as steering or charge stabilization. Further studies will be needed to dissect the contributions of specific ZapC residues in the ZapC-FtsZ interaction.
Thus, our combined data point to a general mechanism for ZapC-mediated FtsZ binding/bundling that involves two adjacent pockets on a ZapC monomer (Fig. 8). Strikingly, modeling shows that binding by each of these regions of the ZapC monomer to FtsZ molecules from distinct protofilaments brings the protofilaments within very close proximity to facilitate bundling without leading to steric clash between the protofilaments (Fig. 8). Moreover, the continued addition of ZapC monomers leads to a "zipper" model in which non-interacting ZapC subunits align to fasten together the two protofilaments (Fig. 8). An alternative to this model is that each ZapC pocket region could bind FtsZ molecules and aid in their incorporation into a single protofilament. This might facilitate FtsZ bundling, as previous studies have indicated that the generation of longer, more stable FtsZ protofilaments facilitates the eventual formation lateral contacts (46,47). Previous data have indicated that ZapC decreases the GTPase activity of FtsZ (20,21). This could be explained by the zipper model in which multiple ZapC molecules bind close to the GTP binding pocket between subunits. Clearly, further studies will be needed to probe these models and obtain an understanding of the likely complex molecular mechanism by which this novel FtsZ regulatory protein functions.
Author Contributions-M. A. S. and A. J. designed the study and wrote the paper. W. Z. purified the proteins. M. A. S. crystallized ZapC and determined its x-ray structure. K.-H. H. and L. T. performed all functional studies including EM and sedimentation studies. All authors analyzed the results and approved the final version of the manuscript.